Guillotine for cutting veneer Kuper EFS

Guillotine series EFS to work with veneer

Designed for fast and accurate parubky veneer. Straight and parallel cutting veneer is an essential advantage of machines KUPER EFS series. High precision cutting provides further bonding quality of veneer of any sorts. Position control device a parallel focus is equipped with digital meter width, digital keyboard, counter, cycles of cutting and selection buttons for different types of operations. Single or in increments of the size of the processed material is accepted by the control device when pressing the "start" button. In the device memory can persist 99 the width of the material. It is possible to switch values of measurement "inch/mm". The tabs on the edges of strips of veneer are cut at step adjustment of the position of the parallel fence.

Features of the machine
High quality cutting is achieved thanks to the swivel and a powerful stretching motion of the knife at an angle of 20 degrees;
Highly visible marking of the cutting lines green light beam;
Auxiliary table layout and rectangular emphasis to facilitate alignment of the veneer strip;
Wide pressure plate allows you to align before cutting even wavy veneer;
Powerful crank drive enables you to cut the veneer across the grain;
The cutting edge of the knife that allows you to do a regrind, has a width of 30 mm;
Discrete actuators of the machine reduces energy consumption and noise level;
The safety of the operator is provided with the light-marking of the safety zone, the machine operates only while the involvement of the 2 hands of the operator applies electronic control system and protective grille from the rear of the machine;
The machine can cut paper, plastic, foil and other materials.

-----------------------------------------------

Read more:

- on the website: https://tekhno.pro,

- https://www.facebook.com/Tekhno.pro/

E-mail: info@tekhno.pro