Combined machine Stomana ADM 320. Universal machine
Offer type: salePublished: 06.11.2019
| Price: | 1 990 UAH |
| Company: | BK Tehnologicheskoe BYuRO |
| Seller: |  TEHBYuRO Stanki Derevoobrabotka |
| Phones: |  +380444905550 Show phone |
| Address: | Ukraine |
Surface and thickness planer.
Designed for machining from solid and composite wood, the creation of underlying surfaces and treatment in the thickness dimension (the so-called flat milling to a given thickness dimension).
High quality and precision machining of workpieces.
Minimum time required for a transition from planer to work rassasavanii and Vice versa.
Cast iron work tables with the ground surface.
The tables node planer with fine adjustment.
The thicknessing table node with Central column and supports.
Activation and deactivation of a surface gauge is carried out without stopping the machine.
Microtubules, turn off the machine when opening the outbound table in the planing mode.
Lock starting the machine when opening the tables or struzhkolomatelja in the modes of planing and thicknessing, respectively.
Stroikombinata, provided with a pipe for connection to a suction system. Closes the cutter block mode planar milling (thicknessing) and prevents access to the knife shaft from the bottom (under the tables) in the mode of planing. Stroikombinata can be locked in two positions: to work in the mode of planing and thicknessing.
The dividing partitions between the cutter shaft and the feed and pulling rollers, preventing touch with them as well as closing access to the knife shaft under the jointer tables.
The ability to customize homescreens and lock in adjusted position.
Limiter outbound table not allowing it to drop below the highest point of the knife roller.
Slotted strap at the ends of the planer tables located close to the knife shaft. Reduce noise and remain always at a distance of from 1 to 5 of mmda circle cutting, regardless of the position of the planer table height.
Multi-grab protection, protects against reverse blow details in thicknessing mode. Located on the input side thicknesser node, before the feed roller, covers the entire working width of thicknesser node. Consists of separate grabs шириной15 mm, mounted on the shaft.
Electronic brake for electrodynamics stopping of engine.
Protection against voltage drop below the permissible limits.
Emergency stop on main panel.
Protective neutral earthing.
Motor protection from overload on the basis of the built-in thermal contacts.
Degree of protection IP54 the electrical system.
The CE standard.
-----------------------------------------------
Designed for machining from solid and composite wood, the creation of underlying surfaces and treatment in the thickness dimension (the so-called flat milling to a given thickness dimension).
High quality and precision machining of workpieces.
Minimum time required for a transition from planer to work rassasavanii and Vice versa.
Cast iron work tables with the ground surface.
The tables node planer with fine adjustment.
The thicknessing table node with Central column and supports.
Activation and deactivation of a surface gauge is carried out without stopping the machine.
Microtubules, turn off the machine when opening the outbound table in the planing mode.
Lock starting the machine when opening the tables or struzhkolomatelja in the modes of planing and thicknessing, respectively.
Stroikombinata, provided with a pipe for connection to a suction system. Closes the cutter block mode planar milling (thicknessing) and prevents access to the knife shaft from the bottom (under the tables) in the mode of planing. Stroikombinata can be locked in two positions: to work in the mode of planing and thicknessing.
The dividing partitions between the cutter shaft and the feed and pulling rollers, preventing touch with them as well as closing access to the knife shaft under the jointer tables.
The ability to customize homescreens and lock in adjusted position.
Limiter outbound table not allowing it to drop below the highest point of the knife roller.
Slotted strap at the ends of the planer tables located close to the knife shaft. Reduce noise and remain always at a distance of from 1 to 5 of mmda circle cutting, regardless of the position of the planer table height.
Multi-grab protection, protects against reverse blow details in thicknessing mode. Located on the input side thicknesser node, before the feed roller, covers the entire working width of thicknesser node. Consists of separate grabs шириной15 mm, mounted on the shaft.
Electronic brake for electrodynamics stopping of engine.
Protection against voltage drop below the permissible limits.
Emergency stop on main panel.
Protective neutral earthing.
Motor protection from overload on the basis of the built-in thermal contacts.
Degree of protection IP54 the electrical system.
The CE standard.
-----------------------------------------------
Read more:
- on the website: https://tekhno.pro,
- https://www.facebook.com/Tekhno.pro/
E-mail: info@tekhno.pro
