Panel sizing machine Holztechnik P30
Offer type: salePublished: 06.11.2019
| Price: | negotiated |
| Company: | BK Tehnologicheskoe BYuRO |
| Seller: |  TEHBYuRO Stanki Derevoobrabotka |
| Phones: |  +380444905550 Show phone |
| Address: | Ukraine |
Panel saw machines are used for cutting or scraping in a given size of the various plate materials such as plywood, fiberboard, particleboard and even solid wood. When choosing formatar should be based on the following parameters: capacity, cutting length and type of carriage, and to pay attention to the ergonomic and technical characteristics of the machine.
PE "BK Technological Bureau" is the official representative in the Ukrainian market of panel sizing machines and HOLZTECHNIK offers various models of formatek, inexpensive – for a small performance and expensive with high performance industrial grade.
The most simple and inexpensive machine of the company HOLZTECHNIK is a model HOLZTECHNIK P 30. Model HOLZTECHNIK P 30 has a ball carriage type. This type of carriage is suitable for workpieces of relatively small dimensions. So carriage it is recommended to use on the sliding machine carriage length up to 2500 mm, so the R30 model has two modifications: the length of the carriage 1600 mm and 2200 mm. the carriage is also available eccentric clamp, which allows a reliable fixation of sawn material.
Both modifications of the machine are rigid construction, reinforced on the perimeter, which prevents various mechanical changes (deformation) in the process of operation, as a result, reduces vibration making the machine capable of long time work without reconfiguring.
Modification of the machine HOLZTECHNIK P30 with ball carriage length 1600 mm, width 315 mm and has a carriage stroke 1600 mm.
Modification of the machine HOLZTECHNIK P30 with ball slide length 2200 mm, width 360 mm and has a carriage stroke of 2200 mm.
Desktop size HOLZTECHNIK P30 has a length of 1003 mm and a width 1726 mm.
Structurally, the saw unit most machines identical. This machine has a main saw diameter 305 mm bore diameter 30 mm. In the machine HOLZTECHNIK P30 engine power main saw blade 5 HP or 3.75 kW. Engine single-speed without the possibility of changing the speed of rotation of the saw. The speed of rotation of the saw blade smooth 4000 rpm which is sufficient for cutting all types of chipboard.
Another common parameter for most existing formaton is the angle of the saw. The machine HOLZTECHNIK P30 the saw can be tilted at an angle from 0 to 45o. The slope of the saw, by turning the flywheel.
In addition to the main saw blade, the saw unit HOLZTECHNIK P30 has a coping saw. Motor power scoring saw blade 1 HP or 0.75 kW. It is required when working with tiled slab materials. Scoring saw blade has a diameter of 120 mm and seat for scoring in 20 mm Relative to the main blade rotation speed scoring saw blade is 8000 Rev/min Direction of rotation scoring unit saw blade associated with the direction of the translational movement of the material. Mills scoring saw blade in the workpiece a groove of small depth and width, then a basic saw makes a kerf, preventing chipping of material at the output of the saw tooth of the workpiece.
Height adjustment of the main saw blade and scoring is done by hand, the rotation of the flywheel.
Machine HOLZTECHNIK P30 has a protective cover placed over the saw and mounted on the riving knife. Has a hole for connection to aspiration system.
Also the machine HOLZTECHNIK P30 has a side aluminum line that easily moves on rails. The adjustment range is carried out manually. The range of desired to that used during the cutting to the desired width of the workpiece.
-----------------------------------------------
PE "BK Technological Bureau" is the official representative in the Ukrainian market of panel sizing machines and HOLZTECHNIK offers various models of formatek, inexpensive – for a small performance and expensive with high performance industrial grade.
The most simple and inexpensive machine of the company HOLZTECHNIK is a model HOLZTECHNIK P 30. Model HOLZTECHNIK P 30 has a ball carriage type. This type of carriage is suitable for workpieces of relatively small dimensions. So carriage it is recommended to use on the sliding machine carriage length up to 2500 mm, so the R30 model has two modifications: the length of the carriage 1600 mm and 2200 mm. the carriage is also available eccentric clamp, which allows a reliable fixation of sawn material.
Both modifications of the machine are rigid construction, reinforced on the perimeter, which prevents various mechanical changes (deformation) in the process of operation, as a result, reduces vibration making the machine capable of long time work without reconfiguring.
Modification of the machine HOLZTECHNIK P30 with ball carriage length 1600 mm, width 315 mm and has a carriage stroke 1600 mm.
Modification of the machine HOLZTECHNIK P30 with ball slide length 2200 mm, width 360 mm and has a carriage stroke of 2200 mm.
Desktop size HOLZTECHNIK P30 has a length of 1003 mm and a width 1726 mm.
Structurally, the saw unit most machines identical. This machine has a main saw diameter 305 mm bore diameter 30 mm. In the machine HOLZTECHNIK P30 engine power main saw blade 5 HP or 3.75 kW. Engine single-speed without the possibility of changing the speed of rotation of the saw. The speed of rotation of the saw blade smooth 4000 rpm which is sufficient for cutting all types of chipboard.
Another common parameter for most existing formaton is the angle of the saw. The machine HOLZTECHNIK P30 the saw can be tilted at an angle from 0 to 45o. The slope of the saw, by turning the flywheel.
In addition to the main saw blade, the saw unit HOLZTECHNIK P30 has a coping saw. Motor power scoring saw blade 1 HP or 0.75 kW. It is required when working with tiled slab materials. Scoring saw blade has a diameter of 120 mm and seat for scoring in 20 mm Relative to the main blade rotation speed scoring saw blade is 8000 Rev/min Direction of rotation scoring unit saw blade associated with the direction of the translational movement of the material. Mills scoring saw blade in the workpiece a groove of small depth and width, then a basic saw makes a kerf, preventing chipping of material at the output of the saw tooth of the workpiece.
Height adjustment of the main saw blade and scoring is done by hand, the rotation of the flywheel.
Machine HOLZTECHNIK P30 has a protective cover placed over the saw and mounted on the riving knife. Has a hole for connection to aspiration system.
Also the machine HOLZTECHNIK P30 has a side aluminum line that easily moves on rails. The adjustment range is carried out manually. The range of desired to that used during the cutting to the desired width of the workpiece.
-----------------------------------------------
Read more:
- on the website: https://tekhno.pro,
- https://www.facebook.com/Tekhno.pro/
E-mail: info@tekhno.pro
