Edge banding machine Holz-Her Lumina 1584
Offer type: salePublished: 06.11.2019
| Price: | negotiated |
| Company: | BK Tehnologicheskoe BYuRO |
| Seller: |  TEHBYuRO Stanki Derevoobrabotka |
| Phones: |  +380444905550 Show phone |
| Address: | Ukraine |
The new LUMINA series offers a unique combination in the field of processing plate materials: two systems for perfect zero joint. System Glu Jet glue application for batch application of polyurethane glue and a new module for laser edges LTRONIC from HOLZ-HER, unmatched in speed and efficiency.
With a length of only 6.5 meters, the LUMINA 1584 offers professional and comprehensive treatment with all necessary units.
The 8.5-inch color touch screen 16 : 9 format. Highly efficient control system with a simple interface for efficient initial setup and changeovers.
Color touch screen with a diagonal of 18.5" as standard.
Graphical user interface all information is displayed in text and (or) graphic form.
Ease of use — the ability to rotate and tilt the control panel at eye level.
A simple program call by either entering the names and numbers of the program.
Capacious memory for a variety of treatment programs.
Independent selection of units with the functions of the basic settings, set points, waypoints and correction of errors of the tool.
Service messages in text form.
Individual user administration for up to ten users with passwords and individual rights.
Network connection
Service online, fast data exchange with the service center HOLZ-HER.
Connector for barcode scanner.
Thanks to an optimized and automatic management of pressure settings with validation of the company HOLZ-HER has realized the automatic control of the amount of glue used, depending on needs. In addition, the machine is equipped with adaptive trimming with a knife, the pressure of which is automatically adjusted according to the thickness of the edge. Also has adaptive clamping mechanism which optimally tunes the pressure of the individual pressure rollers depending on the particular application. This allows to minimize errors in configuring and scrap rate.
[1] Automatic control of the amount of glue
[2] Adaptive trimming knife
[3] Adaptive clamping mechanism.
Feed system edge
Edge stores with drive SYNCHRO.
Due to the synchronous adaptation to the feed rate of the store provides a small distance between workpieces and simultaneously optimizes the eaves edge.
Small feed angle thanks to the concept of attachments — seamless flow edges with solid wood of thickness up to 20 mm.
Planer milling
Often have cut edges there are small chips in the top layer. Planer milling unit handles perfectly bonded surfaces and prepares the sheet material for applying the adhesive. The flange is equipped with ProLock quick-change Chuck, diamond cutter (Ø 70 mm).
Height adjustment for optimal use of the blades.
With a symmetrical diamond cutters (Ø 100 mm) for highest quality welds and a long service life. Height adjustment is made automatically by two servisami CNC (optional).
Is standard on ACCURA 1558 performance.
LTronic — edge replaceable laser module
Laser edging LTronic module specially developed for the machines series LUMINA. It can be used for all commercially available edge materials with a functional layer. For use with laser edge is available in two different module NIR:
the NIR module for edges up to a height of 23 mm (standard)
module NIR+to edge up to 45 mm (option)
(NIR = Near Infrared Radiation, near infrared radiation)
Enough to include and you can work — the new LTronic system doesn't take time to warm up, as well as stages of heating during operation. In addition, the whole system runs completely silently, which means an obvious advantage for the user compared to other systems. The need for cleaning is minimized. Only once in a week you need to clean the protective glass of the module NIR.
A notable feature is the edge materials library, fully integrated into the control system. It has stored data about the most common co-extruded edges, and edges are additionally coated that user can just select on the touch screen. For each laser edging needs a certain amount of energy, which is dependent, for example, thickness or color edging material. After
With a length of only 6.5 meters, the LUMINA 1584 offers professional and comprehensive treatment with all necessary units.
The 8.5-inch color touch screen 16 : 9 format. Highly efficient control system with a simple interface for efficient initial setup and changeovers.
Color touch screen with a diagonal of 18.5" as standard.
Graphical user interface all information is displayed in text and (or) graphic form.
Ease of use — the ability to rotate and tilt the control panel at eye level.
A simple program call by either entering the names and numbers of the program.
Capacious memory for a variety of treatment programs.
Independent selection of units with the functions of the basic settings, set points, waypoints and correction of errors of the tool.
Service messages in text form.
Individual user administration for up to ten users with passwords and individual rights.
Network connection
Service online, fast data exchange with the service center HOLZ-HER.
Connector for barcode scanner.
Thanks to an optimized and automatic management of pressure settings with validation of the company HOLZ-HER has realized the automatic control of the amount of glue used, depending on needs. In addition, the machine is equipped with adaptive trimming with a knife, the pressure of which is automatically adjusted according to the thickness of the edge. Also has adaptive clamping mechanism which optimally tunes the pressure of the individual pressure rollers depending on the particular application. This allows to minimize errors in configuring and scrap rate.
[1] Automatic control of the amount of glue
[2] Adaptive trimming knife
[3] Adaptive clamping mechanism.
Feed system edge
Edge stores with drive SYNCHRO.
Due to the synchronous adaptation to the feed rate of the store provides a small distance between workpieces and simultaneously optimizes the eaves edge.
Small feed angle thanks to the concept of attachments — seamless flow edges with solid wood of thickness up to 20 mm.
Planer milling
Often have cut edges there are small chips in the top layer. Planer milling unit handles perfectly bonded surfaces and prepares the sheet material for applying the adhesive. The flange is equipped with ProLock quick-change Chuck, diamond cutter (Ø 70 mm).
Height adjustment for optimal use of the blades.
With a symmetrical diamond cutters (Ø 100 mm) for highest quality welds and a long service life. Height adjustment is made automatically by two servisami CNC (optional).
Is standard on ACCURA 1558 performance.
LTronic — edge replaceable laser module
Laser edging LTronic module specially developed for the machines series LUMINA. It can be used for all commercially available edge materials with a functional layer. For use with laser edge is available in two different module NIR:
the NIR module for edges up to a height of 23 mm (standard)
module NIR+to edge up to 45 mm (option)
(NIR = Near Infrared Radiation, near infrared radiation)
Enough to include and you can work — the new LTronic system doesn't take time to warm up, as well as stages of heating during operation. In addition, the whole system runs completely silently, which means an obvious advantage for the user compared to other systems. The need for cleaning is minimized. Only once in a week you need to clean the protective glass of the module NIR.
A notable feature is the edge materials library, fully integrated into the control system. It has stored data about the most common co-extruded edges, and edges are additionally coated that user can just select on the touch screen. For each laser edging needs a certain amount of energy, which is dependent, for example, thickness or color edging material. After
