B/a gas engine Caterpillar 3520, 2014 ,2 MW Container

The representative of the Swedish company Sumab Energy offers You to get acquainted with equipment for production of electric energy and heat - cogeneration.

Sumab Energy company actively cooperates with the European equipment suppliers - MWM, Caterpillar, GE Jenbacher.

The company Sumab Energy uses in its projects B/install MWM, Caterpillar, GE Jenbacher with a little time, usually 30-40 000 operating hours (about 4-5 years), which allows to reduce the cost of the project 2 times! in comparison with the use of new equipment. All installations are fully maintained by qualified personnel and are in perfect working condition.

Gas power plants produce electricity from various types of gas fuel. Power plants are functioning:

natural gas
biogas
associated gas,
mine gas.
gas treatment facilities of sewage,
landfill gas,
blast furnace gas,
coke oven gas, etc.
Gas power plants have a simple and reliable design, verified by tens of years of operation in various climatic conditions. Electrical efficiency of gas-piston power stations is high in contrast, such as turbines and microturbines, and when working on high-quality natural gas is about 39-44%.

Gas power plants presented in a wide range of individual electric power from 800 KW to 4 MW. This power range is the main. That is, in the small and mid-range consumers it is possible to obtain almost any value of electric power Autonomous gas piston power plant.

Almost all models and brands of gas power plants in the expanded configuration can operate in cogeneration mode, i.e. as thermal power plants. The temperature of the exhaust gases at the outlet of the power machines gas power plants is ~ 390 ± 10° C. This temperature makes it easy to get almost free heat energy in cogeneration mode.

The ratio of issue of electricity and thermal energy equal to 1:0.9, i.e., 1 MW of installed electric power, it is possible to obtain 0.9 GCR thermal energy.

The ratio of the vapor production from gas power plants of equivalent to 0.5-0.7. Steam can be used for production purposes.

Technical characteristics of gas-piston power station B/U GPA Caterpillar 3520, 2014, V. 2 000 KW 9 000 operating hours operating time, and Container type.

Caterpillar is the market leader in the production of electricity using powerful solutions, providing unmatched flexibility, expandability, reliability and cost effectiveness.

Settings

Wide range of mounting accessories for mounting bolts made in the factory and tested at the factory.

Flexible packaging options for easy and economical installation.
- Fully tested

CAT GAS Engine G3520E SCAC 4-stroke gas engine with water cooling
The number of cylinders V20
Diameter - mm (in) 170 (6,7)
Stroke - mm (in) 190 (7,5)
Displacement - L (cu In) 86 (5 248)
The compression ratio of 11.6: 1

Cooling type turbocharged and twin-cooled
Two-stage after-cooler, JW + O / C + A / C 1
Fuel system
Electronic (ADEM III)

CAT SR4B Generator
The size of the frame 828
Permanent magnetic step 0,7777
Number of poles 4
Bearing number 2
The number of leads 6

CAT EMCP II + control Panel
● Power 24 VDC
● NEMA 12, IP44 dust-proof enclosure
● Lockable hinged door
● Communication with one client
● Automatic start / stop control
● The voltage adjust potentiometer
● Measure true RMS AC, 3 phase
● Purge cycle and staged shutdown
● Digital indication
● Shutdown with indicator lights
● Programmable function protective relay
● Spare LEDs
● Spare alarm inputs / off