Sell pumps 200д90 (vipom Bulgaria)for pumping water and similar to it in viscosity and chemical activity of the fluids with a temperature up to 120°C
Offer type: salePublished: 19.11.2019
| Price: | 49 000 UAH |
| Company: | GENPROM OOO |
| Seller: |  Natal'ya Anatol'evna |
| Phones: |  0503032907 Show phone |
| Address: | Ukraine |
Centrifugal single-stage pump 200Д90 two-way fluid inlet in the impeller comes in
the following versions:
for pumping water and similar to it in viscosity and chemical activity of the fluids with a temperature up to 85°C.
for pumping water and similar to it in viscosity and chemical activity of the fluids with a temperature up to 120°C
(the temperature is further stipulated in the order).
for pumping water and similar to it in viscosity and chemical activity of the fluids up to 140°C
(the temperature is further stipulated in the order).
for pumping of petroleum products of viscosity up to 120 cSt temperature up to 85°C.
for pumping of petroleum products of viscosity up to 120 cSt, temperature up to 120°C.
for pumping chemically active liquids. The material flow part 12X18H9T.
Casing and pump cover are connected in a horizontal plane on the axis of the shaft. Flanges of suction and
discharge nozzles are located on opposite sides of the housing in the plane perpendicular to the axis
shaft.
The service provided by the rotor without dismantling the pump from the pipes of the piping and Foundation.
Flange dimensions conform to
BDS EN 1092:1998; GOST 12815 80.
The pump is equipped with gland or mechanical seal shaft.
Pump test according to BDS EN ISO 9906 : 2000+AS:2006, technical data are given for water at
20°C.
The pump is driven by an electric motor or internal combustion engine.
The pumps are made in horizontal and vertical designs that can reduce the size
the pump station in 25 - 30%.
Marking pump include the following:
Example:
140D40A CHU,
140DV40A CHU
140 nominal flow (rounded), l/C;
D centrifugal, single-stage, double-sided sign;
DV centrifugal, single-stage, double-sided sign, vertical version;
40 total head at rated flow at M. B. S.;
A (B, C) variant with reduced impeller diameter;
CHU mechanical shaft seal.
In the absence of this indication, the pump is gland-sealed.
the following versions:
for pumping water and similar to it in viscosity and chemical activity of the fluids with a temperature up to 85°C.
for pumping water and similar to it in viscosity and chemical activity of the fluids with a temperature up to 120°C
(the temperature is further stipulated in the order).
for pumping water and similar to it in viscosity and chemical activity of the fluids up to 140°C
(the temperature is further stipulated in the order).
for pumping of petroleum products of viscosity up to 120 cSt temperature up to 85°C.
for pumping of petroleum products of viscosity up to 120 cSt, temperature up to 120°C.
for pumping chemically active liquids. The material flow part 12X18H9T.
Casing and pump cover are connected in a horizontal plane on the axis of the shaft. Flanges of suction and
discharge nozzles are located on opposite sides of the housing in the plane perpendicular to the axis
shaft.
The service provided by the rotor without dismantling the pump from the pipes of the piping and Foundation.
Flange dimensions conform to
BDS EN 1092:1998; GOST 12815 80.
The pump is equipped with gland or mechanical seal shaft.
Pump test according to BDS EN ISO 9906 : 2000+AS:2006, technical data are given for water at
20°C.
The pump is driven by an electric motor or internal combustion engine.
The pumps are made in horizontal and vertical designs that can reduce the size
the pump station in 25 - 30%.
Marking pump include the following:
Example:
140D40A CHU,
140DV40A CHU
140 nominal flow (rounded), l/C;
D centrifugal, single-stage, double-sided sign;
DV centrifugal, single-stage, double-sided sign, vertical version;
40 total head at rated flow at M. B. S.;
A (B, C) variant with reduced impeller diameter;
CHU mechanical shaft seal.
In the absence of this indication, the pump is gland-sealed.
