B/gas installation MWM TCG 2032 V 16, 4300 KW

The representative of the Swedish company Sumab Energy offers You to get acquainted with equipment for production of electric energy and heat - cogeneration.

Sumab Energy company actively cooperates with the European equipment suppliers - MWM, Caterpillar, GE Jenbacher.

The company Sumab Energy uses in its projects B/install MWM, Caterpillar, GE Jenbacher with a little time, usually 30-40 000 operating hours (about 4-5 years), which allows to reduce the cost of the project 2 times! in comparison with the use of new equipment. All installations are fully maintained by qualified personnel and are in perfect working condition.

Gas power plants produce electricity from various types of gas fuel. Power plants are functioning:

natural gas
biogas
associated gas,
mine gas.
gas treatment facilities of sewage,
landfill gas,
blast furnace gas,
coke oven gas, etc.
Gas power plants have a simple and reliable design, verified by tens of years of operation in various climatic conditions. Electrical efficiency of gas-piston power stations is high in contrast, such as turbines and microturbines, and when working on high-quality natural gas is about 39-44%.

This means that to produce the same amount of electricity in comparison with turbines, gas power plants consume one-third (!) natural gas is less.

Gas power plants presented in a wide range of individual electric power from 800 KW to 4 MW. This power range is the main. That is, in the small and mid-range consumers it is possible to obtain almost any value of electric power Autonomous gas piston power plant.

Almost all models and brands of gas power plants in the expanded configuration can operate in cogeneration mode, i.e. as thermal power plants. The temperature of the exhaust gases at the outlet of the power machines gas power plants is ~ 390 ± 10° C. This temperature makes it easy to get almost free heat energy in cogeneration mode.

The ratio of issue of electricity and thermal energy equal to 1:0.9, i.e., 1 MW of installed electric power, it is possible to obtain 0.9 GCR thermal energy.

Technical characteristics of gas-piston power station B/U MWM TCG 2032-16

2010. Life of only 15,000 hours.

Model: TCG 2032 16 DEUTZ ( MWM) 4 300 KW

The power of 4.300 KW

Gas consumption 9.344 kW at maximum load 100%

Cylinders and configuration 16 V

The engine speed is 1000 rpm.

Electro. Efficiency of 42.8 %

Thermo. Efficiency of 44.5 %

Air consumption 20 537 kg/HR

The exhaust temperature is ~ 459 ° C

The engine has a generator of electrical power 5.055 kVA.

Voltage is 6600 V.

The current situation with the engine:

The unit has the engine running 15,800 hours.

1 x 4,000 MW engine:

The exhaust gas from the engine is directed to the boiler, which produces heat, it is also possible to install a steam generator (option), producing saturated steam 3 t / h at 7.5 bar using the heat of exhaust gases.

The conditions of the steam engine:

Water inlet temperature 95 ºC

Maximum steam flow with the exhaust gases from

Engine 3 t/h

Was the pressure of 9 bar Normal

Working pressure 7,5 bar Pairs

The amount of steam 3.000 kg / h Exhaust

The total thermal balance of the cogeneration unit as follows:

- Production of hot water

- Steam (Optional) with exhaust gases at 7.5 bar 3 t / h engine

Pumps and fans

Managing control panel

Panel engines

Coolers fans air cooling