B/GPA MWM TCG 2020 V20, 2000 KW, 2018 V.

The representative of the Swedish company Sumab Energy offers You to get acquainted with equipment for production of electric energy and heat - cogeneration.

Sumab Energy company actively cooperates with the European equipment suppliers - MWM, Caterpillar, GE Jenbacher.

The company Sumab Energy uses in its projects B/install MWM, Caterpillar, GE Jenbacher with a little time, usually 30-40 000 operating hours (about 4-5 years), which allows to reduce the cost of the project 2 times! in comparison with the use of new equipment. All installations are fully maintained by qualified personnel and are in perfect working condition.

Gas power plants produce electricity from various types of gas fuel. Power plants are functioning:

natural gas
biogas
associated gas,
mine gas.
gas treatment facilities of sewage,
landfill gas,
blast furnace gas,
coke oven gas, etc.
Gas power plants have a simple and reliable design, verified by tens of years of operation in various climatic conditions. Electrical efficiency of gas-piston power stations is high in contrast, such as turbines and microturbines, and when working on high-quality natural gas is about 39-44%.

This means that to produce the same amount of electricity in comparison with turbines, gas power plants consume one-third (!) natural gas is less.

Gas power plants presented in a wide range of individual electric power from 800 KW to 4 MW. This power range is the main. That is, in the small and mid-range consumers it is possible to obtain almost any value of electric power Autonomous gas piston power plant.

Almost all models and brands of gas power plants in the expanded configuration can operate in cogeneration mode, i.e. as thermal power plants. The temperature of the exhaust gases at the outlet of the power machines gas power plants is ~ 390 ± 10° C. This temperature makes it easy to get almost free heat energy in cogeneration mode.

Technical characteristics of gas-piston power station B/U GPA MWM TCG 2020 V20, 2 000 kW, 2018 V., time - 0 hours.

Engine Manufacturer MWM

Engine type TCG 2020 V20

Power Of 2 000 KW

RPM 1500

Fuel Natural Gas

Alternator Marelli MJH 630 LA4

Hz 50

Year of production 2018

Hours – 0 (zero)

Includes:

Engine
Generator
The pipeline
Control panel

MWM TCG 2020 V20, 2 MW.

Technical data fuel: natural gas

No. 500,0 mg/Nm3 *

Minimum methane number of MP 8012! Dry exhaust pipe

Engine type ТСG 2020 V20

Power 2056 KW

Rotation speed rpm 1500

Mean effective pressure of 18.6 bar

The exhaust gas temperature approx. °C 424

Mass of exhaust gas in a wet condition approx. kg 10741

The amount of air for combustion of the fuel approx. kg/h, 10402

The temperature of the supply air, min./Optim. With 20/25

The amount of supply air approx. kg/h, 49028

Engine Parameters

The cylinder diameter/stroke mm 170/195

The working volume of DMZ 8 88.5

Compression ratio 13.5:1

Mean piston speed m/s 9.8

Lube oil capacity dm3 300

The average oil consumption at full load ° g/kWh 0.20

Generator

Alternator efficiency * % 97.3

Energy balance

Electrical power at the terminals of the generator * kW 2000

The heat transfer capacity of the cooling jacket +8% kW 978

The power of heat intercooler stage 2” +8% kW 172

Heat radiation engine kW 70

The radiation generator 55 kW

Capacity fuel consumption +5% kW 4581

Electrical efficiency % 43.7

Thermal efficiency % 43.3

Overall efficiency % 87.0