"EL ES GROUP - aluminum bearing ROSA.

Aluminum props dia. 114mm at the base and ending 60mm Support Ø114 mm at the base and ending with Ø60 adapted for mounting on the top support of a single lamp or a singleton of end cap type WA. The base press out of aluminum sheet with a thickness of 8 mm and comes in two sizes: side 224 mm and 260 mm The wall thickness of support varies depending on the height of support: from 3 mm at the base and at the height of the niche to 2.6 mm at the top. Type of support: SAL-3/B60 SAL-3,5/B60 SAL-4/B60 SAL-4,5/B60 SAL-3/D60 SAL-3,5/D60 SAL-4/D60 SAL-4,5/D60 View of the grounds mm Base sheet 224 x 224 x 8 The base sheet 260 x 260 x 8 The mount bearing 1. Foundation-50 (Code 311150) Anchor Z-50 (Code 311205) Placement of bolts 180 x 180 2. Foundation-51 (Code 311151) Anchor Z-51 (Code 311251) Placement of bolts 200 x 200 Used lamps (mounted on the support) OPC-1 Ø60, OP, OPA-1 Applied end cap WA-01, WA-1, WA-2, WA-3, WA-4. Lighting columns Rosa type SAL DECO-2 Lighting support SAL DECO-2 has a construction similar to SAL DECO-1, but the difference is that it used the cover in the shape of a rectangle with adjustable angle. The cover is mounted on two supporting consoles. The base is also made of aluminum sheet by stamping. The lamps are designed for metal halide lamps 150 W with base G-12. Available in the first class of insulation with protection degree IP65. Lighting columns SAL DECO-2 is designed for lighting walkways, modern townships, retail spaces, hotels, etc. Flagpoles Made of aluminium alloy. They are intended for fastening of flag with an area of 6 m2. The design consists of two elements: cone bottom Ø from 114 to 180 mm, and a cylindrical upper part. The base of the flagpole press out of aluminum sheet with a thickness of 8 mm, a party from 224 mm wall Thickness at the base is 3.4 mm, and on the top from 2.6 mm Standard flagpoles are manufactured in height from 6 to 16. Due to the pivoting part, made of synthetic material, and passing inside of the flagpole cord, the flag is always in a free state under the influence of wind. Each flagpole is at the level of 1.2 m niche, in which is hidden the tension mechanism of the cord. Access to niche provided by means of the screw with the atypical form of the head. Additional equipment is the cross member that guarantees the demonstration flag, despite the lack of wind. Standard flagpoles are made of anodized or painted by powder technology. Flagpoles can be mounted on concrete foundations or using anchor devices. Lighting poles type SP A characteristic feature supports type SP is a modern and direct form elements of synthetic material. In the design of the bearings in this series are: three different bases, five different external elements, - steel construction sootvetstvuushuu each type. On the basis of the above-mentioned elements are five main types of supports SP using connection basis from two to five elements of synthetic material. The performance of niches is possible only in the case when the design uses the element 1. The end supports of the type SP allow installation of single lamps and aluminum end cap type WT and WTM. Support depending on the height and diameter of the base adapted for mounting on the Foundation type B or with the use of anchoring devices of type Z: - In-20, Z-20 - Ø225 mm, - B-30, Z-30 or B-40, Z-40 - Ø300 mm, - B-42, Z-42 - 400 mm x 400 mm The main colors are: black, gray, white. When you order a minimum of 100 pieces of support available in other colors Stylish bearing type S Intended use: for illumination of streets in the old part of the city, historical sites, parks, etc. Technical data: height: 1,40 m to 5.28 m end of support: type "A" - designed for the installation of consoles; type "B" is designed for use fixtures with a mounting end ø60: OS-1, OP-400 OP-450; type "D" - is intended for use fixtures with a mounting end ø76: OPC-1 ø76; the base: - ø225 - anchoring device Z-20 - ø300 - anchoring device Z-40 manufacturer: without a niche or niche - additional designation with the letter "W"; color - black; material type: coating of plastic material in the standard version; coating of plastic material with higher thermal stability for the version indicated in the code letter "F". For detailed information, please go to our website: www.ls-group.prom.ua