Pulse digital time domain reflectometer RP-211 with measurement function resistance line

The reflectometer RP-211 is designed for the analysis of cable lines with 1, 2 or more lived, including braid, determine the presence of damage in the cable break, short circuit), detection of discontinuities (joints and other) with the ability to determine the distance to the fault. The reflectometer RP-211 combines two methods of measuring the length of cable lines: 1. TDR-method (pulse reflection). This device implemented the full domain reflectometer, enabling the analysis of two or more wired cable lines at a distance of 10 km. 2. DC-method (determination of the parameters of the cable resistance measurements by the method of DC). DC-method allows to determine the length of single core cable, which cannot be done using the TDR method. Also be used as a precision ohmmeter for resistance to 10 kω. Features of the tool TL-211 The device differs from all modern OTDR because of its compactness while maintaining all of the characteristics of the professional series. Comfortable and ergonomic interface device provides ease of use and quick access to all device functions. Low power consumption allows the TL-211 to operate up to 8 hours to fully discharge the batteries. The reflectometer allows to carry out measurements on very short lines - from 10 meters! None of the reflectometer known, cannot compete with the TL-211-the sum of all the stated possibilities with regard to the dimensions of the device! And most importantly - the lowest price among the OTDR this class! Specifications RP-211 The number of TDR channels 2 independent measuring channels The range of measured distances (VP 1.5): From 1 to 10000 m The VP: Install or dimension within 1,000...7,000. Sounding signals: Pulse amplitude of 5 V and a duration of 12.5 NS to 500 NS (increments of 12.5 NS), 0,5 ... 5,0 ISS (increments of 0.1 μs). Automatic or manual installation duration. Output impedance: 25...560 Ohm, continuously adjustable. Overlapping attenuation: 60 dB. The compensation Pulse compensation amplitude of -5 V and a duration of 1...5 µs (increments of 500 NS) Reference system: by means of two vertical cursors Measuring modes: Read and display current traces for either of the two inputs. Comparison 2 traces: 1. Memory - Memory. 2. Input 1 - Memory. 3. Input 2 Memory. 4. Input 1 - Input 2. Work in the automatic measurement mode Measuring in automatic mode, the Ability to conduct automatic measurements as in TDR mode and DC mode. Stretching: stretching the plot traces around the measuring or zero pointer to 128 times. Memory: the Ability to store in the ROM of the device up to 256 traces. Combating noise: Offset additive interference and noise by averaging (2...255 times). Offset from synchronous interference. Information display: the Trace and the processing results are displayed in graphical form. Modes, parameters and information in alphanumeric and symbolic form. DC-method: Measurement of the resistance line from 0.001 Ω to 10 Kω. Method resolution: 0.1 mω. Measurement error resistance: 0.1% + LSB. Temperature compensation cable: external temperature sensor with a measurement error of 1 C. Display: Built-in, based on LCD, 128x64 pixels, with backlight. Communication with PC Via a USB port using a standard USB cable Power supply: Standard power supply 12V, 2A; Li-ion battery 3.7V , 1800mAh. Power consumption: no more than ~ 0.35 watts without light. no more than ~ 0.55 W with backlight. Operating conditions: operating temperature Range: -20°C...+50°C. Dimensions: 75 x 130 x 26 mm Weight: Not more than 0.3 kg The warranty period is 1 year. The apparatus metrologically certified. Number of deliveries: any. http://dneproenergotehnologii.pul.ru, http://dneproenergo.uaprom.net, http://dneproenergotehnologii.pulscen.com.ua +38 (056) 788-51-01, (092) 788-51-01, (095) 601-35-90 SKYPE: energo-CL