Barrel pumps stainless steel BT
| Price: | negotiated |
| Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Ukraine, Kyiv |
BT lineup
TYPE Pressure Production industry Input Output Drive Seal the rotor TandRA bar m3/h mm DIN kW in the rpm BT020S01Y 4 3 56 38 1,1 end 1000 barrel BT020S01YL 4 3 56 38 1,1 mechanical 1000 EurocupThese pumps are designed for both mobile and stationary use in pumping viscous and aggressive liquids in the following cases:
- packing barrels (containers) in smaller containers
- emptying barrels (containers) in technological capacity
- unloading/loading of tanks
- mixing of inhomogeneous fluids
The pumps are characterized by high durability and quality . With relatively small dimensions, the pumps have a high operational characteristics.
The liquid end of the pump is made of high quality material - this food-grade chemical-resistant steel 12X18H10T. The pump is equipped with high quality mechanical seal, has a simple design, easy to disassemble and clean. This pump is indispensable to food companies use in the manufacture of the components, supplied in barrels, and in the chemical industry.
BT schematic diagram
The rotor (1) is a single spiral offset by the value of the eccentricity of the center. Depending on the pumped medium can be made of stainless steel 12X18H10T.
The stator (2) - dvuhserijnaya spiral offset by the value of the eccentricity of the center. The hardness and chemical composition of the elastomer is selected depending on the pumped medium.
Thrust (3) transmits torque from the shaft to the rotor, and also fulfills the eccentricity of the rotor. Material - stainless steel 12X18H10T.
The camera (4) is made of stainless steel 12X18H10T and has an output in the form of the quick connector "nut" DO.
Mechanical seal (5) ensure the sealing of the drive shaft.
Coupling (6) provides a camera attachment to the body pump and is a quick-detachable connection nut DN50.
The actuator (7) is of two types normal and explosion-proof.
Handle mount (8) is made of stainless steel 12X18H10T and is designed for hanging the pump using the hoist.
Case (9) is made of stainless steel 12X18H10T.
Mounting flange (10) is made of stainless steel 12X18H10T.
