the pneumatic valves with angled stem ARI-Stevi® AS 350
| Price: | negotiated |
| Company: | OOO 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Ukraine, Kyiv |
Shut 2/2 way pneumatic valves with angled stem ARI-Stevi® AS 350
Working environment: cold and hot water, steam, compressed air, oil,
alkalis, alcohols and other neutral and aggressive liquids and gases
compatible with materials of construction.
MAIN TECHNICAL DATA
Working environment temperature: -10°C ... +180°C
The viscosity of the working environment: should not exceed 600 mm2/s
Maximum pressure maximum air supply: 10 bar minimum 2-7 bar, depending on the diameter of the valve, and drive performance
Body materials: bronze SK, n/W steel 1.4408
Seal the bolt/saddle: metal/PTFE (standard), metal/FKM (option)
The leakage class: A (full leak)
Connection: internal thread, butt welding, flange
THE MAIN DESIGN FEATURES
* Piston pneumatic actuator, housing material - polyamide PA 66 GF (maximum ambient temperature 60°C)
* Increased throughput compared with most of the analogues.
* The valve is normally closed spring drive. Two models of the actuator, three sizes of springs for each model of drive.
* Traffic flow under the saddle, which excludes the formation of water hammer when closing the valve.
* Spring-loaded self-sealing gasket of the V-shaped Teflon rings.
* Polished rod with two guides.
* Minimum life of 1 million cycles
* Optical position indicator
Additional equipment and options:
* Limit switches and indicators of the extreme positions (Electromechanical or inductive)* 3/2-solenoid valves with NAMUR adapter
* Manual backup
* Stroke limiter
* Normally open valve
* Clenove attaching the valve to the pipeline
