Manual profilegap s-1
Offer type: salePublished: 28.02.2015
| Company: | OOO 'Yunial plyus' |
| Seller: |  Ryabtsev Aleksandr Sergeevich |
| Phones: |  (050)566-68-91 Show phone |
| Address: | Ukraine, Luhans'ka Oblast', Stakhanov |
Manual profilage "n-1" is different from analogues
simplicity of design, reliability and small size,
which you can perform on the objects. Excellent
solution for small forge shop, widely applicable in suburban
construction, for greenhouses, railings, gates, gates, and other
light metal.
Technical characteristics of privilegia "u-1":
- The pipe dimensions for radial bending: tube round - all sizes up to Ø40 mm; tube profile - all sizes from 10*10 to 40*20 mm at the minimum the bend radius of 300 mm. The maximum radius is unlimited. Wall thickness of pipe 1.5 mm;
- Dimensions solid squares and bars for radial bending: the squares of all sizes up to 30x30, rods up to 20mm.
- The size of the corner radius for flexible area with a maximum width and thickness of a shelf 40*3mm
- Size strips for radial flexible-strip on the edge of all sizes up to 40*8mm or 30*10mm, strip flatwise all sizes up to 50*mm
Profilegap allows in the shortest possible time to recoup the investment and make a profit, possible individual selection set.
Technical parameters of profilehere:
- Possibility of quick change of rollers, the change of the distance between the shafts to adjust the minimum radius of bending.
- Manual drive 2 lower shaft with chain transmission.
The rollers and shafts are made of solid steel.
The lower shafts have 2 disks - each for tuning the desired size of the profile by a different setup.
- Easy installation profilehere using the existing holes in the base.
Technical characteristics of privilegia "u-1":
- The pipe dimensions for radial bending: tube round - all sizes up to Ø40 mm; tube profile - all sizes from 10*10 to 40*20 mm at the minimum the bend radius of 300 mm. The maximum radius is unlimited. Wall thickness of pipe 1.5 mm;
- Dimensions solid squares and bars for radial bending: the squares of all sizes up to 30x30, rods up to 20mm.
- The size of the corner radius for flexible area with a maximum width and thickness of a shelf 40*3mm
- Size strips for radial flexible-strip on the edge of all sizes up to 40*8mm or 30*10mm, strip flatwise all sizes up to 50*mm
Profilegap allows in the shortest possible time to recoup the investment and make a profit, possible individual selection set.
Technical parameters of profilehere:
- Possibility of quick change of rollers, the change of the distance between the shafts to adjust the minimum radius of bending.
- Manual drive 2 lower shaft with chain transmission.
The rollers and shafts are made of solid steel.
The lower shafts have 2 disks - each for tuning the desired size of the profile by a different setup.
- Easy installation profilehere using the existing holes in the base.
