Layer the heat exchanger Swep B 25THx30/1P-SC-M

Layer the heat exchanger SWEP

Plate menupane the heat exchangers of the Swedish company "Swep" were not so widespread in the Ukrainian market until recently, however, in the countries of Central Europe firmly occupy one of the leading places and used in the design and manufacture of refrigeration installations and cooling fluid many leading manufacturers of refrigerators and chillers as evaporators, condensers, coolers superheated steam (desuperheater), exchangers, economizers, heat exchangers liquid/liquid between two coolants, etc. In comparison with the products of the next competitors have a number of features associated with design and profile used heat exchanger plates, construction series, different brands of refrigerants, and in full and have all the basic advantages of plate heat exchangers:
• high coefficient of heat transfer is ensured due to the high turbulence when driving fluid flow within the heat transfer plates;
• low weight the refrigerant in the heat exchanger in the process that provides less weight refrigerant charge refrigeration machine, in which as evaporator or condenser is used plate heat exchanger;
• smaller, in comparison with other types heat exchangers, dimensions, allowing refrigeration the unit as a whole to have significantly smaller dimensions and weight.
"Swep" produces plate menupane heat exchangers, two main series:
series B - plate menupane the heat exchangers used in refrigeration installations as condensers and heat exchangers liquid/liquid. Often used as coolers superheated steam to heat water using heat from the hot exhaust vapor pressure of the refrigeration installation.
series V - plate menupane the heat exchangers used in refrigeration in as evaporators. The main difference from the heat exchangers of the series B - the presence at the input of the refrigerant distributor (distributor) fluid, which enables you to evenly distribute between the plates vapor-liquid mixture resulting from the expansion of liquid refrigerant in the expansion valve.

TECHNICAL CHARACTERISTICS OF PLATE HEAT EXCHANGERS SWEP BRAZED

General characteristics of the Flow through one unit, m3/h: 0,1 - 200 Operating pressure, bar: up to 45 Temperature range, °C: 195°C... +350 Connection DN: 25 - 200 (welding, flange, thread) Material: stainless steel

The heat exchangers brazed plate SWEP B the main multi-function heat exchanger. The main structural material for this series is stainless steel AISI 316, and as the solder used pure copper. Usually the pressure range (i.e., maximum working pressure) for heat exchangers of this type is to 31 bar (450 psi) at temperatures up to 225°C. is Used as condensers, evaporators or normal-phase (water-water) heat exchangers