Welding machine for the manufacture of mesh and armopoyas
| Price: | negotiated |
| Company: | ChP Pradchenko |
| Seller: |  Slavik |
| Phones: |  0677542860 Show phone |
| Address: | Ukraine |
Welding Semiautomatic Pneumatic action (SPD)
The machine is designed for welding masonry grids of wires (prepared by the bars) SL. characteristics:
The minimum diameter of welded fittings - 2 mm
The maximum diameter of welded fittings - 5 mm
The maximum width of welded mesh - 1000 mm
The maximum length of the welded mesh is limited by the longitudinal length of the workpiece (complete table for up to 2 m)
Step cross (infinitely adjustable) - 50 - 200 mm
Step longitudinal (continuous adjustment) - 50 - 200 mm
Three-phase supply network - 380V, 50Hz
Maximum power consumption - 70-150 kW
Current - 40-140 And (depending on welded diameter of wire and the number used electrodes)
The welding time is 0,3-0,4 sec
Drive type - pneumatic
Type of load transverse rod is manually
Type of load longitudinal rod - manually
The control type of the pullback carriage - machine
Type of control by forging and welding machine
Type enable welding - simultaneously in a series or cascade
Working air pressure - 0.4 to-0.9 MPa
Cooling - forced when using transformers TCE-75
Staff: 1 person, he is the operator
Performance: not less than 600 square meters per shift (depending on map size)
The kit includes:
Machine SMXP-1000 - 1pcs.
Side rod holder
Table distribution
The reception Desk
The machine is equipped with:
The welding transformer TCE-75 - 2pcs
The electrodes in the quantity PCs - 16 (bottom) and 16 (upper)
The electronic control unit busp -1pc
Basic the machine is equipped 95 000 UAH. Optional equipment of the machine can change depending on the wishes, the price is calculated under the trim.
