SAER CM-SMR centrifugal pumps single impeller (CAEP, Italy)
Offer type: salePublished: 27.02.2015
| Company: | Armapostach |
| Seller: |  Petrenko Evgenij |
| Phones: |  067 238-58-31 Show phone |
| Address: | Kyiv, Ukraine |
Working principle:
Exterior nassoy centrifugal type with a single impeller. The pumped fluid passing through the spiral form of the pump casing , is transformed from kinetic energy (dynamic pressure energy. The pressure and flow is achieved with minimal losses by using a special design of the impeller. The pumps in this series can be used in industrial and domestic purposes, for injection of water into the tanks for irrigation of vegetable gardens and orchards.
Technical characteristics.
- Flow up to 8 cubic meters/hour
- Head to 59 m
- Used for pumping clean water and chemically non-aggressive liquids without abrasive inclusions
- Temperature of pumped liquid -15 °C to +70 °C.
- Maximum ambient temperature 40 °C.
- For use at higher temperatures, please contact the developer.
- Maximum working pressure of 9 bar.
- Permissible hydraulic value according to UNI /ISO 2548 Class C, Annex b, electrical characteristics are in accordance with CEI.
- Operating parameters listed in the catalog provide a long service life of the pump when pumping clean water with a density of 1000 kg/cubic meters
- Manometric suction depth up to 8m, to gauge the depth of suction over 5m is recommended to mount the suction line with an internal diameter larger than the diameter of the suction port of the pump.
