Will sell the machine air plasma cutting machine CUT-60 WMaster

The plasma cutting WMaster CUT-60 - for air-plasma cutting of all types of alloys and metals with thickness up to 21 mm at the separation rezé and 15 mm high quality cutting. The apparatus is used for cutting with manual movement of the plasmatron.

The phone is made insertional technology, characterized by: the control accuracy (due to feedback) and stable cutting current. The regulation limits the cutting current range from 20A to 60A, and ustanavlivaetsya depending on the type of metal, metal thickness, and the required cutting speed.

Advantages in comparison with gas manual sharp clear:

• The minimum cost at high speed and cutting quality;
• The ability to perform without the preparatory works of the cutting ukrashenie x contaminated surfaces;
• Full otsutstvie deformation of the cut parts;
• Loss of metals when cutting the minimum;
• There is no need for subsequent processing for welding and Assembly operations after cutting, as the cut is characterized by clean edges;
• Operating costs are negligible.

Main advantages:

• Comparing transformer-sources - low power consumption
• The continuous adjustment of the operating current cutting
• The non-contact arc starting
• The protection against overload and overheating
• Cutting capacity as conventional steels and high-alloy and non-ferrous metals
• High efficiency
• Maintaining the cutting current at a specified level regardless of the length of the network cable, as well as the fluctuations of the supply voltage

Specifications:

The supply voltage, 3 h In The frequency of the supply network, 50 Hz The open-circuit voltage, 240V Rated air pressure Mpa 4,5 - 6,5 Nominal operating voltage, V 102 In Rated cutting current, And (PV, %) 60 (60%) The regulation limits the cutting current, And 20 - 60 And Regulation of the cutting current smooth The thickness of the metal being cut, mm quality cut 15mm dividing through 21mm Maximum power consumption kVA 7,0 Air consumption 200 l/min The ignition of the arc contactless Cooling plasmatron air Mass, 16kg Dimensions dimensions, not more than HH mm