Sell plasma cutting machine Paton-HDD-120

Apparatus for plasma cutting inverter type. The range of current cutting 30-120A, M=60%. Contactless ignition. The thickness of the metal cutting up to 40 mm Contactless ignition. Ensures a smooth surface after cutting. A high degree of protection against overloads. Used for cutting carbon, alloy, stainless steels, copper, aluminum.

Specifications PATON-HDD-120

PARAMETERS

WHEN-HDD-120

Supply voltage (3 phase)

380

Rated input power, kV·a

25,7

Nominal current consumption And

37

The magnitude of the output current, And

30 - 120

The open-circuit voltage,

345

The rated voltage of the load,

128

The duration of the load, MO %

60

The gas pressure in the torch, MPa

0,45

The gas flow rate, l/min

250

The maximum thickness of the cut metal (carbon steel), mm

35

The optimum thickness of the cut metal (carbon steel), mm

1 - 30

Overall dimensions, mm

576×297×557

Weight, kg

43,5

Advantages PATON-HDD-120

Machine air plasma cutting inverter type-HDD-120 is designed for plasma cutting low carbon, alloy, stainless steel thickness from 1 mm to 35 mm (mild steel) non-ferrous metals and alloys.

The design of the inverter WHEN-HDD-120 along with the use of MOS transistors, applied pulse-width modulation (PWM), which allowed to apply in the design stepless control parameters and operating modes.

The device has appropriate for this type of inverters static and dynamic characteristics.

Inverter WITH-HDD-120, can be widely applied in the repair and installation work at industrial enterprises, construction sites, farms, fleets, garage cooperatives.

The main properties and advantages of inverter-HDD-120:
- Small size and weight
Smooth adjustment and switching operational modes, high performance
- Delay main power effectively protects the electrode of the plasma torch from premature wear
- High quality and smooth edges for cutting
- The presence in the plasma torch protection against short circuit
- Excitation of high-frequency arc at the initial cutting facilitates the start
- The use of technology compensation of the power factor, reduce reactive current consumption
- Implemented in the design of thermal protection
- Ability to use 2 circular/4 cyclical operating mode