Sell argon-arc installation Tig 200 AC/DC crepow
Offer type: salePublished: 28.02.2015
| Price: | 10 400 UAH |
| Seller: |  Denisenko Aleksandr |
| Phones: |  0631615365 Show phone |
| Address: | Ukraine |
This brand modern inverter TIG setup, allowing you to work as a constant (welding of steels, copper, titanium etc) and alternating current (alloys of aluminum, magnesium, copper alloys large thickness, etc. that require the removal of oxides from the welded surface). Argon-arc welding of aluminum and stainless steel allows to achieve a quality weld with good form in the complete absence of spray. Supports AC / DC MMA / Lift TIG / HF TIG types of welds.
Easy to use product, due to the original interface. Many settings of the welding arc allows to select an optimal mode, which gives a higher quality and greater productivity .
Light weight and small dimensions of the device allow you to work faster on a large area, and for the same height.
Due, prostate interface and derive information on the digital display of operating parameters, as well as high quality seam welding with this machine can learn even not skilled workers.
Welding work can be carried out starting from 5A , it is able to produce nearly jewelry work at small thicknesses of metal.
Easy to use product, due to the original interface. Many settings of the welding arc allows to select an optimal mode, which gives a higher quality and greater productivity .
Light weight and small dimensions of the device allow you to work faster on a large area, and for the same height.
Due, prostate interface and derive information on the digital display of operating parameters, as well as high quality seam welding with this machine can learn even not skilled workers.
Welding work can be carried out starting from 5A , it is able to produce nearly jewelry work at small thicknesses of metal.
Main advantages:
-Full-featured with outstanding welding in TIG mode
-Selectable modes of MMA ( with a hot start, with afterburner arc, conventional welding )
-Select the mode of pulsation
-Save and load parameters .
-Built-in microprocessor with digital control.
-Intelligent thermal protection .
-Smart self-test
-Compact and portable
-Full-featured with outstanding welding in TIG mode
-Selectable modes of MMA ( with a hot start, with afterburner arc, conventional welding )
-Select the mode of pulsation
-Save and load parameters .
-Built-in microprocessor with digital control.
-Intelligent thermal protection .
-Smart self-test
-Compact and portable
Description of the control buttons:
1) Display ammeter
2) Display voltmeter and other parameters (Frequency, adjusting the base current in %, the thickness of the metal )
3) status Indicator ( on/off)
4) Button selection modes MMA( with a hot start, with afterburner arc, conventional welding)
5) adjustment Button of the welding process
6) Potentiometer
7) adjustment Button of the welding process
8) power Button mode ripple
9) Button on the high-frequency mode HF
10) Click "Test gas" ( gas)
11) Button to switch modes 2T/4T
12) Button switching current AC/DC
1) Display ammeter
2) Display voltmeter and other parameters (Frequency, adjusting the base current in %, the thickness of the metal )
3) status Indicator ( on/off)
4) Button selection modes MMA( with a hot start, with afterburner arc, conventional welding)
5) adjustment Button of the welding process
6) Potentiometer
7) adjustment Button of the welding process
8) power Button mode ripple
9) Button on the high-frequency mode HF
10) Click "Test gas" ( gas)
11) Button to switch modes 2T/4T
12) Button switching current AC/DC
Features:
ERP-code - 00.0065
Supply voltage, V - 20V /- 10%
Input frequency, Hz - 50/60
Power consumption, KW TIG - 4,5 MMA - 7,0
Nominal current consumption, And TIG - 30,1 MMA - 46,8
The duration of the load , MO % - 25
The open circuit voltage, V - 66
Adjustment range current ,A AC: 10-200 DC: 5-200
The decline of the arc , S - 0-10
The time of the purge gas before welding, S - 0-1
The time of the purge gas after welding, S - 3-10
Pulse width , % - 15-50
The pulse frequency , Hz 0.5 to 200
AC frequency , Hz - 50-250
The range of pulse duration , % - 5-100
The power coefficient of - 0.68
Weight, kg - 20
Dimensions, mm - HH
Degree of protection - IP23S
Insulation class F
The cooling - air
ERP-code - 00.0065
Supply voltage, V - 20V /- 10%
Input frequency, Hz - 50/60
Power consumption, KW TIG - 4,5 MMA - 7,0
Nominal current consumption, And TIG - 30,1 MMA - 46,8
The duration of the load , MO % - 25
The open circuit voltage, V - 66
Adjustment range current ,A AC: 10-200 DC: 5-200
The decline of the arc , S - 0-10
The time of the purge gas before welding, S - 0-1
The time of the purge gas after welding, S - 3-10
Pulse width , % - 15-50
The pulse frequency , Hz 0.5 to 200
AC frequency , Hz - 50-250
The range of pulse duration , % - 5-100
The power coefficient of - 0.68
Weight, kg - 20
Dimensions, mm - HH
Degree of protection - IP23S
Insulation class F
The cooling - air
Package contents:
- TIG Torch SR-17 (air) , 3m - 1 piece
- Kappa short - 1 piece
- Kappa long - 1 piece
-Tsang D. 1,6 - 1 piece ; 2,4 - 1 piece
- the body of the collet D. 2,4 - 1 piece
the ceramic nozzle No. 4 - 1pc.; 5-1pc. ; 6 - 1pc.
Cable with electrode holder , 3m - 1 piece
Cable with klemay ground , 3m - 1 piece
- TIG Torch SR-17 (air) , 3m - 1 piece
- Kappa short - 1 piece
- Kappa long - 1 piece
-Tsang D. 1,6 - 1 piece ; 2,4 - 1 piece
- the body of the collet D. 2,4 - 1 piece
the ceramic nozzle No. 4 - 1pc.; 5-1pc. ; 6 - 1pc.
Cable with electrode holder , 3m - 1 piece
Cable with klemay ground , 3m - 1 piece
