Sell multi-process welding inverter Jasic ST-416 (TIG/MMA/plasma)
Offer type: salePublished: 28.02.2015
| Price: | 5 700 UAH |
| Seller: |  Denisenko Aleksandr |
| Phones: |  0631615365 Show phone |
| Address: | Ukraine |
Welding inverter CT series is a compact multi-function welding machine, which allows three types of work:
- argon-arc welding with direct current (DC TIG);
- manual arc welding (MMA DC);
plasma cutting;
- argon-arc welding with direct current (DC TIG);
- manual arc welding (MMA DC);
plasma cutting;
Welding inverter CT-416 will become your indispensable assistant in carrying out various types of repair and installation works at an auto repair shop, garage or construction site. The device is equipped with the function of the contactless excitation of the arc, has a high performance, low power consumption, provides high quality welding and cutting, reliable. The coefficient of performance (COP) of this equipment is over 85%. The device has a built-in system of automatic compensation of the incoming mains voltage, which allows him to maintain stable operation when oscillation network within the acceptable range.
This welding inverter manufactured on modern element base with the use of MOSFET transistors and the application of the principle of pulse-width modulation, due to what is stable, reliable and efficient operation. Arc length and fluctuations in the mains voltage do not affect the stability of the welding current value when performing TIG and MMA welding. The versatility of mobility and compactness of the source, as well as connectivity to household 220V wide open borders for its application.
Welding inverter ST-416 is designed for welding and cutting of metals such as carbon and stainless steels, cast iron, copper, titanium, non-ferrous metals. Mode plasma cutting additionally, you must be connected to the compressor or compressed air with a pressure of 5-6 Bar. Welding the compressor is not required. The mode of air-plasmino cutting, as well as possible, suitable for cutting aluminium, so as to cut blanks of aluminum or its alloys, other methods of thermal cutting difficult. The delivery device includes all the necessary accessories for TIG welding and plasma cutting.
This welding inverter manufactured on modern element base with the use of MOSFET transistors and the application of the principle of pulse-width modulation, due to what is stable, reliable and efficient operation. Arc length and fluctuations in the mains voltage do not affect the stability of the welding current value when performing TIG and MMA welding. The versatility of mobility and compactness of the source, as well as connectivity to household 220V wide open borders for its application.
Welding inverter ST-416 is designed for welding and cutting of metals such as carbon and stainless steels, cast iron, copper, titanium, non-ferrous metals. Mode plasma cutting additionally, you must be connected to the compressor or compressed air with a pressure of 5-6 Bar. Welding the compressor is not required. The mode of air-plasmino cutting, as well as possible, suitable for cutting aluminium, so as to cut blanks of aluminum or its alloys, other methods of thermal cutting difficult. The delivery device includes all the necessary accessories for TIG welding and plasma cutting.
Specifications (TIG/MMA/plasma):
- The mains voltage of 220±15% Volt
- Input power 6 kVA
- Power supply frequency 50/60 Hz
- Open circuit voltage 62 / 62 / 250 Volt
- Adjustment range welding current 15-160 / 15-150 / 20-40 Amps
- Rated voltage 16 / 27 / 96 Volt
- PV 60%
- Idling losses 40 W
- 85% efficiency
The power factor of 0.93
- Insulation class "B"
- IP23
The method of excitation of high-frequency arc / touch / high-frequency
- Metal gage - / - / 10 mm
- The diameter of the electrode (TIG/MMA) 1,6-4,0 mm
- Cutting depth 12 mm
- The weight 13 kg
- Dimensions mm HH
Package contents: welding machine, ARTICLE 416, TIG Torch WP17, short bracket long bracket, Tsang D 1,6/2,4/3,2 mm, holder collet D 3.2 mm, a set of nozzles (4 pieces ) - D 6,4/8/9,8/11,2 mm, a tungsten electrode D of 1.6 175 mm, reverse cable with ground terminal 3M, cable lug, the plasmatron RT 31 (consumable kit).
- The mains voltage of 220±15% Volt
- Input power 6 kVA
- Power supply frequency 50/60 Hz
- Open circuit voltage 62 / 62 / 250 Volt
- Adjustment range welding current 15-160 / 15-150 / 20-40 Amps
- Rated voltage 16 / 27 / 96 Volt
- PV 60%
- Idling losses 40 W
- 85% efficiency
The power factor of 0.93
- Insulation class "B"
- IP23
The method of excitation of high-frequency arc / touch / high-frequency
- Metal gage - / - / 10 mm
- The diameter of the electrode (TIG/MMA) 1,6-4,0 mm
- Cutting depth 12 mm
- The weight 13 kg
- Dimensions mm HH
Package contents: welding machine, ARTICLE 416, TIG Torch WP17, short bracket long bracket, Tsang D 1,6/2,4/3,2 mm, holder collet D 3.2 mm, a set of nozzles (4 pieces ) - D 6,4/8/9,8/11,2 mm, a tungsten electrode D of 1.6 175 mm, reverse cable with ground terminal 3M, cable lug, the plasmatron RT 31 (consumable kit).
