Sell inverter apparatus for argon-arc welding TIG-180P KIND
Offer type: salePublished: 28.02.2015
| Price: | 4 700 UAH |
| Seller: |  Denisenko Aleksandr |
| Phones: |  0631615365 Show phone |
| Address: | Ukraine |
Inverter installation TIG-180P "KIND" is intended for argon-arc welding with non-consumable electrode (TIG mode), as well as for manual arc welding with coated electrodes (MMA mode) to direct current (DC).
Main advantages:
2.Contactless ignition of the arc in TIG mode at a constant current (oscillator)
3.The presence of a pulse welding mode (PULSE).
4.Continuous adjustment of welding current
5.Digital display of welding current
6.Two modes of welding Long seams (4-stroke mode) and "short welds" (2-stroke mode)
7.The presence of adjustment time smooth decrease of the welding current at the end of welding (welding crater)
8.The presence of adjustment time of the purge gas at the end of the welding
9.Easy excitation and stability of the arc
10.Low power consumption
11.The presence of thermal protection against overload
12.Protection from voltage and current
13.Quick and safe current connectors
14.Push-in fitting burner for gas connection
15.The function of welding with coated electrode at a constant current (MMA-DC)
16.Contemporary design control panel
17.Small weight and overall dimensions
Technical data:
Supply voltage 220±15%
Rated current supply circuit 17.5
Operating voltage when welding 17V
Rated output 3.7 kW
The open-circuit voltage 42V
Welding current range 10-180A
The diameter of the electrode TIG 0,5-4,0 mm
The diameter of the electrode MMA 1,6-4,0 mm
The duty cycle when the current is 200A (PV) 60%
The time of the purge gas after welding 2,5-10C
The high Frequency arc starting
The fall time current 0-5sec
Power consumption 60W idle
Efficiency of at least 85%
Coefficient of electrical power 0,80
Insulation class "F"
Protection class housing R
The thickness of the TIG welding of 0.3~8.0 mm, MMA and 1.0~10mm
Dimensions mm
Weight 7.8 kg
2.Contactless ignition of the arc in TIG mode at a constant current (oscillator)
3.The presence of a pulse welding mode (PULSE).
4.Continuous adjustment of welding current
5.Digital display of welding current
6.Two modes of welding Long seams (4-stroke mode) and "short welds" (2-stroke mode)
7.The presence of adjustment time smooth decrease of the welding current at the end of welding (welding crater)
8.The presence of adjustment time of the purge gas at the end of the welding
9.Easy excitation and stability of the arc
10.Low power consumption
11.The presence of thermal protection against overload
12.Protection from voltage and current
13.Quick and safe current connectors
14.Push-in fitting burner for gas connection
15.The function of welding with coated electrode at a constant current (MMA-DC)
16.Contemporary design control panel
17.Small weight and overall dimensions
Technical data:
Supply voltage 220±15%
Rated current supply circuit 17.5
Operating voltage when welding 17V
Rated output 3.7 kW
The open-circuit voltage 42V
Welding current range 10-180A
The diameter of the electrode TIG 0,5-4,0 mm
The diameter of the electrode MMA 1,6-4,0 mm
The duty cycle when the current is 200A (PV) 60%
The time of the purge gas after welding 2,5-10C
The high Frequency arc starting
The fall time current 0-5sec
Power consumption 60W idle
Efficiency of at least 85%
Coefficient of electrical power 0,80
Insulation class "F"
Protection class housing R
The thickness of the TIG welding of 0.3~8.0 mm, MMA and 1.0~10mm
Dimensions mm
Weight 7.8 kg
