Sell inverter apparatus for argon-arc welding TIG-200P KIND
Offer type: salePublished: 28.02.2015
| Price: | 5 700 UAH |
| Seller: |  Denisenko Aleksandr |
| Phones: |  0631615365 Show phone |
| Address: | Ukraine |
Inverter welding TIG-200P(NEW) designed to perform the following types of welding:
- TIG welding with direct current DC TIG
pulse argon arc welding with direct current DC Pulse TIG
- manual arc welding stick electrode MMA
- TIG welding with direct current DC TIG
pulse argon arc welding with direct current DC Pulse TIG
- manual arc welding stick electrode MMA
Welding inverter TIG-200P have a number of advantages:
is the regulator of smooth voltage drop
regulator purge gas after completion of welding
two-mode pulsations with adjustable frequency ripple
- selectable mode of operation of the burner (2-stroke and 4-stroke full)
- easy operation and ergonomic design
- the use of inverter modules MOSFET and high-frequency transducers latest generation allows to increase efficiency and reduce energy consumption, while reducing weight and dimensions compared to conventional counterparts
- high reliability, easy operation and maintenance
- high-frequency ignition of the electric arc, the stability of the electric arc during welding
- minimum welding current, stable arc when welding stainless steels
- automatic management of surge capacity
- high degree of protection power supply
Technical data:
Supply voltage 220±15%
Rated current supply circuit 20A
Operating voltage when welding 18V
Rated output power of 3.9 kW
The open-circuit voltage 55V
Welding current range 10-200A
The diameter of the electrode TIG 0,5-4,0 mm
The diameter of the electrode MMA 1,6-4,0 mm
The duty cycle when the current is 200A (PV) 60%
The time of the purge gas after welding 2,5-10C
The high Frequency arc starting
The fall time current 0-5sec
Power consumption 60W idle
Efficiency of at least 85%
Coefficient of electrical power 0,80
Insulation class "F"
Protection class housing R
The thickness of the TIG welding of 0.3~8.0 mm, MMA and 1.0~10mm
Dimensions mm
Weight 7.8 kg
is the regulator of smooth voltage drop
regulator purge gas after completion of welding
two-mode pulsations with adjustable frequency ripple
- selectable mode of operation of the burner (2-stroke and 4-stroke full)
- easy operation and ergonomic design
- the use of inverter modules MOSFET and high-frequency transducers latest generation allows to increase efficiency and reduce energy consumption, while reducing weight and dimensions compared to conventional counterparts
- high reliability, easy operation and maintenance
- high-frequency ignition of the electric arc, the stability of the electric arc during welding
- minimum welding current, stable arc when welding stainless steels
- automatic management of surge capacity
- high degree of protection power supply
Technical data:
Supply voltage 220±15%
Rated current supply circuit 20A
Operating voltage when welding 18V
Rated output power of 3.9 kW
The open-circuit voltage 55V
Welding current range 10-200A
The diameter of the electrode TIG 0,5-4,0 mm
The diameter of the electrode MMA 1,6-4,0 mm
The duty cycle when the current is 200A (PV) 60%
The time of the purge gas after welding 2,5-10C
The high Frequency arc starting
The fall time current 0-5sec
Power consumption 60W idle
Efficiency of at least 85%
Coefficient of electrical power 0,80
Insulation class "F"
Protection class housing R
The thickness of the TIG welding of 0.3~8.0 mm, MMA and 1.0~10mm
Dimensions mm
Weight 7.8 kg
