Sell TIG inverter Paton ADI-L-200P
Offer type: salePublished: 28.02.2015
| Price: | 4 500 UAH |
| Seller: |  Denisenko Aleksandr |
| Phones: |  0631615365 Show phone |
| Address: | Ukraine |
The device is manufactured in climatic design, placement category 3.1 according to GOST 15150-69, class way to protect people from electric shock R according to GOST 14254-80. Welding rectifier inverter type ADI-R-200 manufactured by cooperation.
Specifications:
- Rated supply voltage: Single phase 220V±15% 50/60Hz
- Max. power consumption, kVA: 4,5
- Efficiency: 98%
- Maximum current consumption: 29A
- Duration load TIG: 40%
- Duration loads MMA: 60%
- Open circuit voltage TIG: W
- Open circuit voltage MMA: 9V
- The range of TIG welding currents: 10A ~ 200A
The range of welding currents MMA: 20A ~ 160A
- Purge gas before welding: 0.1 ~ 15s
- Rise time current: 0.1 ~ 10s
- Pulse frequency: 0.2 Hz ~ 20 Hz
- Fall time current: 0.1 ~ 15s
- Current welding crater: 10A ~ 200A
- Purge gas after welding: 0.1 ~ 15s
- Type firing arc: HF
- Capacity: ≥80%
- Insulation class: F
- Protection class: IP21
Overall dimensions, mm: HH
- Weight, kg: 9,5
- Rated supply voltage: Single phase 220V±15% 50/60Hz
- Max. power consumption, kVA: 4,5
- Efficiency: 98%
- Maximum current consumption: 29A
- Duration load TIG: 40%
- Duration loads MMA: 60%
- Open circuit voltage TIG: W
- Open circuit voltage MMA: 9V
- The range of TIG welding currents: 10A ~ 200A
The range of welding currents MMA: 20A ~ 160A
- Purge gas before welding: 0.1 ~ 15s
- Rise time current: 0.1 ~ 10s
- Pulse frequency: 0.2 Hz ~ 20 Hz
- Fall time current: 0.1 ~ 15s
- Current welding crater: 10A ~ 200A
- Purge gas after welding: 0.1 ~ 15s
- Type firing arc: HF
- Capacity: ≥80%
- Insulation class: F
- Protection class: IP21
Overall dimensions, mm: HH
- Weight, kg: 9,5
