Renz Super 500, 1992 год, 4.500 EUR
Offer type: salePublished: 18.12.2014
| Seller: |  post-press.net |
| Phones: |  +380 (67) 401-70-08 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Electric punching machine Renz Super 500 floor standing type, is designed for punching holes in paper, cardboard, plastics, for subsequent fastening springs including wire-o. Most often used for punching calendar block, including calendars with hanger. Structurally machine such Renz Super 700, but has a smaller table size.
Main technical characteristics:
the total width of the table 550 mm,
the working width of the table 500 mm,
maximum stack height 4.5 mm,
the material used is 40...1000 g/m2,
the speed of 400-500 strokes/minute.
Equipment:
electric machine Renz SU 500 floor standing type,
perforating'toole under calendars: step 3:1 square hole 4×4 mm, hole bolt,
perforating'toole under notebooks and notepads: step 2:1 oval hole 8×3 mm
documentation.
1992 release,
in stock in Europe (EU), very good technical condition,
cleaned, checked, you can test in the work,
price 4.500 EUR loading on the transport buyer in Europe,
shipping, customs clearance, connection and adjustment surcharge.
Main technical characteristics:
the total width of the table 550 mm,
the working width of the table 500 mm,
maximum stack height 4.5 mm,
the material used is 40...1000 g/m2,
the speed of 400-500 strokes/minute.
Equipment:
electric machine Renz SU 500 floor standing type,
perforating'toole under calendars: step 3:1 square hole 4×4 mm, hole bolt,
perforating'toole under notebooks and notepads: step 2:1 oval hole 8×3 mm
documentation.
1992 release,
in stock in Europe (EU), very good technical condition,
cleaned, checked, you can test in the work,
price 4.500 EUR loading on the transport buyer in Europe,
shipping, customs clearance, connection and adjustment surcharge.
