Sell textile slings, rope, chain

Slingsare part of lifting mechanisms and machines. This load-handling a fixture that is hung on the cargo hook of a hoisting machine or such mechanism.

Slings are distinguished textile, chain and rope. Apply when lifting and transferring various kinds of cargo in transport, construction sites, warehouses, ports.

Textile slingshave its advantages over rope and chain slings.

They significantly lighter than their steel counterparts, and when working with large slings load easier to produce movement of the sling, it is easier to make its under load, easier to hook for a crane hook. Such slings are quickly becoming its original appearance, which makes them more faster and safer.

Goods with soft edging, significantly less damaged when lifting. Steel slings are of small cross section, and when picked up, say, a cargo of wood metal straps cut into the cargo itself and spoil its appearance. Sling textile greatly in this respect better cope with the task of lifting parts that have carefully prepared. Also textile slings not sometimes protruding metal needles, which are often the cause of serious ragged personal injury. Because of this they are more secure.

Rope slingsin mainly used for lifting and moving different types of freight, where there are special loop for engagement. Rope slings are very resistant to heavy the loads. So the steel rope slings are some of the undeniable reliable slings.

Separate the advantage of wire rope slings in that the defect is possible to detect sling visually at an early stage of the defect. This allows you to use rope slings for raising responsible goods, in places where equipment and people.

Advantage chain sling is undoubtedly their raboteau-suitability at high temperatures up to 3000 °C, the absence of any deformation during Assembly work. Chain slings compact, easy to fold, durable.

Chain slingsare not only very durable, but they can be repaired. With proper use, i.e. without overloads, with the timely replacement of worn components and repair, chain slings are practically unlimited.

Main the disadvantage of such a sling is the difficulty of monitoring the wear of the parts of the sling.

Before the beginning of operation should be considered the maximum working stresses to which will be subject to the slings and the character to be lifted. Size, shape, the weight and the intended method of lifting and working environment and the nature cargo affect the right decision in the selection of the desired line. A sling in the first place, should have a length, measured true enough for the ascent. When lifting the load, there are two sling and more, to their performance characteristics and tolerances they should be the same.