The fm 3304HA, 2001, 27.000 EURO

4 colorful sheetfed offset press Ryobi 3304 HA format A3 with portrait paper has absorbed many digital technology and is ideally suited for printers specializing in short print runs. Structurally Ryobi 3304HA consists of two connected together duotone module the planetary cylinder, and therefore during the passage from 1 up to 4 printed section is only four interception paper. In addition, two intermediate cylinders are double and one triple diameter. This allows fine print on very thin, NCR, self-adhesive or metallic paper, so thick and hard materials intolerant strain of bending.

Main technical characteristics:
the maximum size of the sheets 340×450 mm (submission on the narrow side),
the minimum size of the sheets 190×100 mm,
maximum format printing 330 x 438 mm,
materials thickness 0,04...0.3 mm,
print speed 3...10,000 sheets/hour.

Equipment:
dvukhstepennuyu vacuum feeder Ryobi with a device for removing static electricity,
the humidification system Ryobi SuperDampener,
the recirculation system and cooling of the fountain solution,
semi-automatic plate changing Ryobi Semi-RPC,
axial and radial register is done by using handles,
automatic remover blanket,
remote control Ryobi PCS-F for fine adjustment of the densities of the colors on separate zones,
software interface Ryobi IVS (Ink Volume Setter),
the floor of the transfer cylinder,
Grafoil,
receiving-lead device to remove static electricity.

2001 release,
the press in Europe (EU), very good technical condition,
connected, you can test in the work,
price 27.000 EUR c dismantling and loading to transport the buyer,
payment in EUR direct contract directly to Europe,
shipping, customs clearance, supervision of installation and start-up surcharge.