Gearbox RGSL-160-50-53
| Price: | negotiated |
| Seller: |  Andrej Georgievich |
| Phones: |  0567164923 Show phone |
| Address: | Ukraine |
The worm gear special Elevator RGSL-160 is designed to complete the lift winches. He also can be used in other arrangements after consultation with by the manufacturer.
Reducers should be installed in rooms with ambient temperature from minus 15 to plus 40°C (tropical version to plus 60 °C) and be operated in an explosive and non-corrosive external environment.
The reducer is installed and can be operated only when the location the worm under the wheel at constant or variable loads with periodic stops (PV 0,63; 0,40 - main; 0,25; 0,16) one direction rotation of the worm or reversing. Use the gears if continuous mode is reduced by 40% load.
A characteristic feature of the hoisting gear is its ability to bear significant cantilever load on the output shaft at a constant independent from the gear ratio, torque.
Gearboxes are operated mainly at frequency of rotation of the worm 1000 rpm operate gear when the rotational speed of the worm 1500 rpm with a 20% reduction in torque.
Specifications
Parameters
Gear number (nominal)
10
16
20
25
31,5
40
50
63
Power on high-speed shaft, P1, kW
17,1
10,9
8,9
7,2
6,2
5
4,1
3,5
Nominal torque the torque on the low speed shaft of the reducer, T, N*m
1500
The coefficient action
0,9
0,88
0,86
0,85
0,79
0,77
0,75
0,7
Radial console the load applied to the middle of the seat part of the low speed shaft, N
32000
Weight reducer, kg
170
