inexpensive machine for waterjet cutting machine in China

The company "Shenyang Head Science Technology corporation " sells equipment and supplies for water jet cutting , and other products. One of the suggestions is the product for waterjet cutting.

Waterjet cutting is the processing of materials by high-speed jet of water mixed with hard abrasive particles. Waterjet cutting is used for the manufacture of parts made of steel, non-ferrous metals, glass, plastics, graphite, ceramic, natural stone, etc.

Process description

The principle of operation of equipment for water jet cutting is the separation and removal of particulate material from the cut cavity. The device operates as follows: water is compressed to a pressure 3500-6000 bar, mixed with abrasive particles, accelerated to supersonic speed and is pushed through the hole diameter of 0.2-0.5 mm, the resulting stream is a universal tool for cutting. Subsequently, the residual energy of water extinguished trap located under the equipment.

Advantages of waterjet cutting

The efficiency. Due to the minimum width of cut (no more than 1 mm) reduced the amount of waste when cutting metal sheet, and thereby the efficiency of the method. In addition, there is no need to replace the cutting tool, which allows you to save time and money.

Environmental friendliness. The dust generated when cutting the material, washed with water, when the equipment is no formation of harmful gases. The sludge and the used abrasive is easily disposed of and are not dangerous for the environment.

Minimal impact on the item. Cut waterjet installation details not require tuning because the material does not undergo thermal treatment, is able to change its structure in the cut zone. The process uses low tangential force, i.e. the material to be cut can not be clamped.

The ability to handle most materials. Our waterjet machines do not have restrictions on the types of the processed material and can cut glass, marble, metal, granite, asbestos, easily flammable and fusible substances.

The ease of use of the equipment. When changing the processed material (for example, from metal to glass or plastic) does not require the plant or change the cutting tool. Control of the cutting process is carried out automatically. Equipment can be easily programmed.

No need further processing. The roughness of the edge of an abrasive waterjet cutting is 1.25 Ra, making details in most cases do not require additional processing.

For more information about the settings for waterjet cutting, please contact Us.

Contact information

Shenyang Head Science Technology corporation

Maria

Sales Manager

email: xiaofei.sun@yandex.ru

Tel:+86 13190062143

Skype:maria-waterjet

Icq:606944312

www.headwaterjet.ru