Chinese manufacturer of equipment for water-jet cutting (water-cutting equipment)

Our company Shenyang Head Science Technology corporation specializes in research and development, production of pumps for ultra-high pressure waterjet technology and related areasof from China. The main product campaign - install waterjet cutting is used in the world in various industries, where it is necessary to cut the material.

 

Installation series HEAD made from high-quality components American, Japanese and Taiwanese production is the best solution cost-effective way of cutting materials.

Process description
Waterjet cutting of materials is the separation of material by means of water the high-pressure jet mixed with garnet sand. Water, compressed by the pump high pressure up to 4000 bar.,Next, a mixture of water and abrasive passes through carbide nozzle with a speed of about 1200 m/sec. hits a surface the material being cut. After cutting the residual energy of the jet is extinguished by water, which predvaritelnaya the sump (tank under the grate desktop).

 

 

Technical parameters model :HEAD2060BA/HEAD38030Z)

 1. Nasevubakola pressure :

·Maximum the oil flow 90 l/min

· Maximum the supply of water to 3.7 l/min

· Maximum the hole diameter of 0.33 mm

·Maximum the pressure of 380 MPa

Long working pressure na

· Motor power 30 kW

· Network 380 V/50 Hz/3 phase

Length/Width/Vysota*1000*1420mm

·amplifier Accustream (USA)

·grammarway logic controller Omron

·Heat exchanger water/oil

The valve YUKEN(Japan)

·Volume of the battery 1.3 l

Level sensors oil and oil temperature included

 

2. Desktop:

·Desktop size X and Y h mm

·Axis Z 150 mm

The control accuracy of ±0.01 mm

· Cutting precision ±0.1 mm
repeat accuracy ±0.02 mm

The speed of movement along the axes X and Y 6000 mm/min

·The speed of movement along the axis Z 1000 mm/min

·Cutting head 3-axis

·Method of drive AC Servo drive

·Servo system YaskawaServoMotor (Japan)

Linear moving and SPW (ABBA)TAIWAN
The nozzle and the mixing tube (USA)

Operating temperature 2-40 With

·Frame axes X and Y are made of aluminum

Water tank made of stainless steel

 

3. CNC system:

·19 inch LCD monitor

·Supports DFX and NC formats

System two directions

·Monitoring function specified performance

·Partial modes processing

The ability save coordinates

4.Supply system abrasive, is used for the automated transport of abrasive to the cutting head machines waterjet. Transfer of abrasive mixture is through a digital device that is able to significantly increase the efficiency.
A large amount of the abrasive tank provides long (4-6 hours) continuous waterjet.

On customer request, can additionally be installed:

·4-axis head

·Automatic the adjustable height
 Device for download

Additional cooling of the hydraulic oil

Additional cutting head

Discharge system the spent abrasive

System for water softening

Contact information

Shenyang Head Science Technology corporation

Maria

Sales Manager

email: xiaofei.sun@yandex.ru

Tel:+86 13190062143

Skype:maria-waterjet

Icq:606944312

www.headwaterjet.ru