125 pump DC Pump DC 134 e\a engine with gearbox on the frame in a Kharkov factory

Bitumen pump DS-125 is suitable for pumping organic binders: bitumen, bitumen emulsions, tars, pitches, various mineral oil or any other viscous liquids the viscosity is not more than 350 cSt and a maximum temperature of 250 °C.
Pump heating is performed by passing heated coolant through the annular space of the casing, which in the design of the pump casing are provided two pipes: inlet and outlet coolant. As the coolant vapor used.
Pump DS 125, is mounted on the car the bitumen cars.
Bitumen pump DS 125, is used in the bitumen composition of the station with a Motor drive.

Technical the characteristics of the DC pump 125.
Type pump Gear
Body material and gear Iron
Variable flow l/min 250-500
Nominal rotation frequency, rpm 450
Maximum working pressure, MPa (kgf/cm2) 0.6 (6)
The maximum allowable viscosity of the pumped of product, cm2/s / FTA 3,5/350
Orifice diameter on suction 80
The maximum allowable vapor pressure, the liquid coolant in the heating system, MPa (kgf/cm2) 0.8 (8)
Coolant temperature °C 100-180
Maximum suction head, m 1
Overall dimensions: length width height 523 x 346 x 397
Weight, kg 130

Pump DS-134 pump installation based on pump DS-125

Bitumen pump unit DS-134 parameters:

Performance 30 m3/h

Pressure 6,3 bar ( Flow meter 63)

Frequency pump rotation 415 rpm

Maximum the permissible viscosity of the pumped product is 3.5 cm2/s (350 cSt)

The height of the suction - not more than 1 meter

The motor depending on the viscosity:

· 7.5 kW 1500 rpm

· 11 kW 1500 Rev/min

Produced the pumping unit DS-134 on the basis of pump DS-125 , which consists of :

- pump DS-125

gear cylindrical CO

- motor 7.5 kW 1500 rpm , 11 kW 1500 Rev/min

- welded frame ( which is fixed to the pump DC-125 connected to the reducer ( converts the rotational speed of the motor at 1500 rpm operating speed about 415-450 pump ) and motor.

Pump bitumen have high reliability in exploitation and simplicity the structure, which makes pump DS-125 and pumping units on their basis DS-134 irreplaceable and reliable friend any mechanic.

Our the company is an official representatives of the dealerships a large number of well - known manufacturers of pumping equipment and zapchastey to them, namely - JSC "Pinsk OMZ" Belarus (pumps and units CNSM, Central nervous system, CNSG, Cnsk, ANS, CNS 105, CNS 60, 130 ANS, DS-125, DS, DS-134); LLC "Atomenergomash" (downhole (submersible) pumps ECV 5, ECV 6, 8 ECV, ECV 10, ECW 12) Ukraine; OJSC "Livgidromash" (pumps and the units D, 1D, VK, VKS, VKO, W, NMSH, SCN, SVN, SRL) Russia, JSC "Kataysk pumping plant (pumps HIO, HP, HEE, AHA, AH, X), JSC "Sumy plant "Nasosenergomash" (pumps and units TL, PE, SE, The AVT, Cs, 1D, D, NW), JSC "Sumy machine-building NPO named after. M. V. Frunze" (pumps and units on their basis VVN, AVZ) Ukraine, "Ukrnasosservis" (2CM pumps, TO, DM, CM) of Ukraine, manufacturers of electric motors - (Vladimir Electromechanical Plant, Russia; Novo-Kakhovka Electromechanical Plant, Ukraine), Hoists and Hoist-production of the Balkan ECHO, Bulgaria and Barnaul, Russia, a wide range of motors in stock (obsedian