The pump faecal CM, 2CM, SD all models new from factory in stock with e on the frame/engine Kharkiv

Pumps CM and DM design are centrifugal, horizontal, cantilever, single-stage with closed impeller type and one-way supply fluid to the impeller.

Pumps CM and DM are used for pumping urban and industrial waste masses, which contain large amounts of pollution. The flow channels of the pump are wider compared to the passages of the pumps which transfer clean liquids.

Pumps CM, in contrast to the pumps of DM correspond to international standard ISO 2858, which, in particular, allows their disassembly without disconnecting the piping.

Pumps CM and DM are designed for pumping of municipal and production waste mass and other non-corrosive liquids with density up to 1050 kg/m3 with pH from 6 to 8.5, with temperatures up to +80°C and containing abrasive particle size up to 5 mm is not more than 1% by weight. The limiting concentration the pumped mass is 2%. Limiting the gas content in the pumped medium 5%.

Pump shaft seal – face or double gland.

Hydraulic valve seals is ensured by feeding clean water into the seal area with the pressure exceeding the inlet pressure.

Pumps SM, SD and units on their base are not designed for installation in explosive and fire hazardous premises.

Pumps and electric motor pump units type CM and DM are intended for pumping household and industrial contaminated liquids with hydrogen index (pH) from 2 to 13, density up to 1100 kg/m3, temperature up to 90°C, the content various non-abrasive suspended solids, including wood fiber semi-finished products, concentrations up to 2% by weight, of abrasive suspended solids not more than 1% by volume, up to 5 mm and a hardness not more than 9000 MPa. Limit gas content in the pumped liquid 5%. Electric pump the Assembly of the SM consists of a pump and motor mounted on a common the base plate (frame). Torque the torque from the electric motor to the pump is transmitted through the sleeve-finger clutch. The clutch is closed with a barrier mounted on the base plate.
The pump consists of three main units: driven parts, and running the seal Assembly.
On the case bearings the drive side of the pump have a threaded hole for the mounting of the thermocouple resistance SCI-0979 to control temperature of bearings. The flow-through part consists of pump body, working wheel and the reducer. A reducer has a hatch to clean the duct before the impeller when it is clogged. In the shaft seal in place out of the casing pump (single or double face soft gasket) supply is required technically pure water at a temperature not exceeding 45°C under pressure of 0.5-1 kgf/cm2 exceeding the suction pressure. The water consumption is 1% of the pump output. The inlet duct is directed along a horizontal the axis of the pump, the pressure displayed on the vertical axis and is pointing up. The direction of rotation of the pump shaft clockwise when viewed from the motor side, checked trial brief the start, when checking the pump must be filled with water.
Before commissioning the unit must be grounded. The pump design provides its Assembly and disassembly at the site without disassembly of pressure and the suction pipelines. Main details and the details of a flowing part of the pump (casing, impeller, casing mechanical seal, stuffing box, bearings, protective sleeve) made made of grey cast iron SCH 20 GOST 1412-85, shaft of steel 35 - No. GHOST-88.
Our company is the official dealer representatives having the powers of many renowned manufacturers of pumping equipment and zapchastey to them, namely - JSC "Pinsk OMZ" Belarus (pumps and units CNSM, Central nervous system, CNSG, Cnsk, ANS, CNS 105, CNS 60, ANS 130, DS-125, DS, DS-134); LLC "Atomenergomash" (downhole (submersible) 5 pumps ECV, ECV 6, 8 ECV, ECV 10, ECW 12) Ukraine; JSC "Livgidromash" (pumps and units on their basis D, 1D, VK, VKS, VKO, W, NMSH, SCN, SVN, SRL) Russia, JSC "Kataysk pumping plant (pumps HIO, HP, HEE, AHA, AH, X), JSC "Sumy plant "Nasosenergomash" (pumps and units TL, PE, SE, ERS, KS, 1D, D, NW), JSC "Sumy machine-building NPO named after. M. V. Frunze" (pumps and units on their basis VVN, AVZ) Ukraine, "Ukrnasosservis" (2CM pumps, TO, DM, CM) Ukraine, manufacturers motors - (Vladimir Electromechanical Plant, Russia; Novo Kakhovka Electromechanical Plant, Ukraine), Hoists and Hoist manufacturing Balkan ECHO, Bulgaria and Barnaul, Russia, a wide selection of electric motors in the presence (obsidium 4A, calamus, AM, 4M, data and VO, VR).

We supply goods in Kharkov, Donetsk, Odessa, Rivne, Vinnitsa, Kirovograd, Uzhgorod, Zhytomyr, Chernihiv, Dnipropetrovsk, Mykolaiv, Kramatorsk, Mariupol, Gorlovka, Simferopol, Donetsk, Sumy, Pavlograd, Ternopil, Dnepropetrovsk, Ivano-Frankivsk, Kherson, Kiev, Khmelnitsky, Zaporozhye, Lutsk, Poltava, Donetsk Region, Cherkasy, Lviv, Luhansk, Chernivtsi, Kremenchug.

To buy in Ukraine Russia pump motor Assembly factory authorized dealers Central nervous system TL CNSG new pump with storage D 1D induction motor 2B UR air explosion proof high voltage motor submersible pumps ECV parts