Impact polystyrene 825 mark
Offer type: salePublished: 15.12.2015
| Price: | 112 RUR |
| Company: | OOO Monobrend |
| Seller: |  Salahov Salavat Samatovich |
| Phones: |  +79179225227 Show phone |
| Address: | Russian Federation, Republic of Tatarstan, Nizhnekamsk |
The company "the Boutique" is open for cooperation! The organization supplies plastic raw materials in granules. The volumes are. High impact polystyrene for the manufacture of products using injection molding. Has the ability to molding with accelerated cycle, while maintaining impact strength. Intended for the manufacture of structural foam and such products as housing appliances, toys and articles requiring high gloss
Wholesale price:
112.50 USD (10,000 kg)
112.50 USD (10,000 kg)
Brand: Nizhnekamskneftekhim
Manufacturer country: Russia
Flammability, mm/min, not more than 40
The gloss at an angle of 60, min: 70
Mass fraction of residual styrene, %, not more than 0,05
Elongation at break, %, not less: 40
The rate of melt flow, g/10 min at 200 0 C for 5 kg load, in the range: 7,5±1,5
Flexural strength, MPa, not less: 37
The strength at break, MPa, not less: 17
The softening temperature for Vika, 0C, not below: 84
Impact strength Izod, notched, j/m, not less than 96
