SAER pump station (tank 50 litres)
Offer type: salePublished: 22.12.2015
| Price: | 5 950 UAH |
| Company: | aquapipe |
| Seller: |  Ruslan |
| Phones: |  0930236699 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Pumping station in the collection:
- pump "SAER" M60-N-HP0,5
- accumulator "ZILMET"ULTRA-PRO 5OL H
- straight hose - 1"60 cm
Parameters:
Power - 0.37 kW
Suction depth - 8.0 m
Flow - 45 l/min.
Head - 42 m
The Manufacturer - Italy
Warranty - 12 months.
The use of Pumping stations on the basis of self-priming pumps series M -60 single impeller and a built-in ejector, able to lift water from 8 feet deep. apply mainly composed of automatic pumping stations for water supply of residential houses from shallow wells and from wells pumping water from the tanks for irrigation and water phase, increasing the pressure in the main pipelines of cold water. The pumps are suitable for pumping clean, chemically neutral to materials of the pump, fluid, without solid or long-fibre inclusions.
Design characteristics
The electric motor of closed type with forced cooling.
Suction and discharge pipe is threaded.
Mechanical seal - ceramic and graphite
The rotor is stainless steel
Impeller - thermoplastic
Pump housing - cast iron
Degree of protection IP 44 (IP 55 motor power 2.2 kW).
Standard voltage: 230 V - 50 Hz for single-phase motors 230/400 V - 50 Hz for three-phase motors.
In single-phase motors up to 1.1 kW integrated motor protection.
Restrictions
Fluid temperature: -15 C to +50 C
Maximum ambient temperature: +40 C
Maximum working pressure: 8 bar
Maximum suction depth: 8 m
The motor single phase 230V
The pump is horizontal.
Work with carriers (sending a New Mail and Intime)
- pump "SAER" M60-N-HP0,5
- accumulator "ZILMET"ULTRA-PRO 5OL H
- straight hose - 1"60 cm
Parameters:
Power - 0.37 kW
Suction depth - 8.0 m
Flow - 45 l/min.
Head - 42 m
The Manufacturer - Italy
Warranty - 12 months.
The use of Pumping stations on the basis of self-priming pumps series M -60 single impeller and a built-in ejector, able to lift water from 8 feet deep. apply mainly composed of automatic pumping stations for water supply of residential houses from shallow wells and from wells pumping water from the tanks for irrigation and water phase, increasing the pressure in the main pipelines of cold water. The pumps are suitable for pumping clean, chemically neutral to materials of the pump, fluid, without solid or long-fibre inclusions.
Design characteristics
The electric motor of closed type with forced cooling.
Suction and discharge pipe is threaded.
Mechanical seal - ceramic and graphite
The rotor is stainless steel
Impeller - thermoplastic
Pump housing - cast iron
Degree of protection IP 44 (IP 55 motor power 2.2 kW).
Standard voltage: 230 V - 50 Hz for single-phase motors 230/400 V - 50 Hz for three-phase motors.
In single-phase motors up to 1.1 kW integrated motor protection.
Restrictions
Fluid temperature: -15 C to +50 C
Maximum ambient temperature: +40 C
Maximum working pressure: 8 bar
Maximum suction depth: 8 m
The motor single phase 230V
The pump is horizontal.
Work with carriers (sending a New Mail and Intime)
