Zzbo Compact-45 Mobile Concrete Plant
Offer type: sellPublished: 02.12.2016
| Price: | 58 489 $ |
| Company: | 100149 |
| Phones: |  +73519001127 Show phone |
| Address: | Russian Federation, Chelyabinsk, Zlatoust |
Special features
capacity 45 cu m per hour
no foundation or skip pit needed
twin-shaft concrete mixer
automatic operation mode - "single button" principle
transportation 2 euro trailers or 40-foot containers
quick deployment and start-up - within one working day
technical features
capacity, cu m per hour 35... 45
automatic operation mode
twin-shaft concrete mixer bp-2g-1200s
hoppers (number of x capacity, cu m) 3 x 12 = 36
silo capacity (optional), tons from 22
camozzi pneumatic equipment (italy) camozzi
abac pole position l20p compressor (italy) abac
design summer
load of inert materials into the concrete mixer skip
total power, kw 70
sector gate, pneumatic control
weight, kg 20,000
height, mm 8,650
width, mm 3,550
length, mm 17,550
the plant operates in automatic mode in accordance with the single button principle.
The operator needs to choose grade of concrete (m50... M500) and its amount for loading, and to press the button to start the cycle.
Pa 2. 0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows which can be in-frame or stand near the plant.
All equipment is installed on a reinforced mounting frame which is placed on a level ground.
No foundation or skip pit needed. Twin-shaft concrete mixer is mounted on a platform.
Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.
Dkm-24 batching complex is used for inert materials storage and batching.
There are three hoppers of 12 cu m each. Total capacity is 36 cu m.
A dispensing conveyor belt where component batching is performed is installed under the hoppers.
Components are fed from the hoppers by opening of camozzi pneumatically operated gates (italy).
Upon achievement of the required batch of inert materials, the conveyor is turned on,
and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is stored in a silo (option). The cement silo needs to be manufactured at the site,
or another option shall be chosen. To feed cement from the silo into the cement dispenser,
a screw conveyor shall be purchased. Cement, water and chemical additives are batched in bd-45 block if dispensers.
Cement is batched in cement dispenser with maximum dosage 450 kg.
Water is batched in water dispenser with maximum dosage 250 litres.
Also chemical additives are dispensed in 30 litres dispenser.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture,
camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper.
Then the cycle is repeated. One cycle lasts for 55-60 seconds during which 0. 8 cu m of ready-to-use concrete is produced.
capacity 45 cu m per hour
no foundation or skip pit needed
twin-shaft concrete mixer
automatic operation mode - "single button" principle
transportation 2 euro trailers or 40-foot containers
quick deployment and start-up - within one working day
technical features
capacity, cu m per hour 35... 45
automatic operation mode
twin-shaft concrete mixer bp-2g-1200s
hoppers (number of x capacity, cu m) 3 x 12 = 36
silo capacity (optional), tons from 22
camozzi pneumatic equipment (italy) camozzi
abac pole position l20p compressor (italy) abac
design summer
load of inert materials into the concrete mixer skip
total power, kw 70
sector gate, pneumatic control
weight, kg 20,000
height, mm 8,650
width, mm 3,550
length, mm 17,550
the plant operates in automatic mode in accordance with the single button principle.
The operator needs to choose grade of concrete (m50... M500) and its amount for loading, and to press the button to start the cycle.
Pa 2. 0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows which can be in-frame or stand near the plant.
All equipment is installed on a reinforced mounting frame which is placed on a level ground.
No foundation or skip pit needed. Twin-shaft concrete mixer is mounted on a platform.
Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.
Dkm-24 batching complex is used for inert materials storage and batching.
There are three hoppers of 12 cu m each. Total capacity is 36 cu m.
A dispensing conveyor belt where component batching is performed is installed under the hoppers.
Components are fed from the hoppers by opening of camozzi pneumatically operated gates (italy).
Upon achievement of the required batch of inert materials, the conveyor is turned on,
and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is stored in a silo (option). The cement silo needs to be manufactured at the site,
or another option shall be chosen. To feed cement from the silo into the cement dispenser,
a screw conveyor shall be purchased. Cement, water and chemical additives are batched in bd-45 block if dispensers.
Cement is batched in cement dispenser with maximum dosage 450 kg.
Water is batched in water dispenser with maximum dosage 250 litres.
Also chemical additives are dispensed in 30 litres dispenser.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture,
camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper.
Then the cycle is repeated. One cycle lasts for 55-60 seconds during which 0. 8 cu m of ready-to-use concrete is produced.
