Zzbo Compact-60 Mobile Concrete Plant
Offer type: sellPublished: 02.12.2016
| Price: | 74 991 $ |
| Company: | 100149 |
| Seller: |  22832 |
| Phones: |  +73519001127 Show phone |
| Address: | Russian Federation, Chelyabinsk, Zlatoust |
Special features:
Capacity 60 cu m per hour;
No foundation or skip pit needed;
Twin-shaft concrete mixer - 1,500 liters;
Automatic control system - "single button" principle;
Transportation in two euro trailers or 40-foot containers;
Quick deployment and start-up - within one working day.
Price given on EXW basis
Technical Features:
Capacity, cu m per hour 40...60;
Automatic operation mode;
Twin-shaft concrete mixer BP-2G-1500s;
Hoppers (number of x capacity, cu m) 3 x 12 = 36;
Silo capacity (optional), tons from 22;
CAMOZZI Pneumatic equipment (Italy) CAMOZZI;
ABAC Pole Position L20P Compressor (Italy) ABAC;
Design summer;
Load of inert materials into the concrete mixer skip;
Total power, kW 85;
Sector gate, pneumatic control;
Weight, kg 22,000;
Height, mm 8,650;
Width, mm 3,550;
Length, mm 17,550;
COMPACT 60 concrete plant operates in automatic mode in accordance with the single button principle. The operator needs to choose grade of concrete (M50 ... M500) and its amount for loading, and to press the button to start the cycle. PA 2.0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows which can be in-frame or stand near the plant. All equipment is installed on a reinforced mounting frame which is placed on a level ground. No foundation or skip pit needed. BP-2G-1500s Twin-shaft concrete mixer is mounted on an elevated structure. Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.
For storage and dispensing inert materials: DKM-36 batching complex. There are three hoppers of 12 cu m each. Total capacity is 36 cu m. A dispensing conveyor belt where component batching is performed is installed under the hoppers. Components are fed from the hoppers by opening of Camozzi pneumatically operated gates (Italy). Upon achievement of the required batch of inert materials, the conveyor is turned on, and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is stored in a silo (option). The cement silo needs to be manufactured at the site, or another option shall be chosen. To feed cement from the silo into the cement dispenser, a screw conveyor shall be purchased. Cement, water and chemical additives are batched in BD-60 block if dispensers. Cement is batched in cement dispenser with maximum dosage 600 kg. Water is batched in water dispenser with maximum dosage 300 litres. Chemical additives are batched in 40 litres dispenser.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated. One cycle lasts for 55-60 seconds during which 1 cu m of ready-to-use concrete is produced.
Capacity 60 cu m per hour;
No foundation or skip pit needed;
Twin-shaft concrete mixer - 1,500 liters;
Automatic control system - "single button" principle;
Transportation in two euro trailers or 40-foot containers;
Quick deployment and start-up - within one working day.
Price given on EXW basis
Technical Features:
Capacity, cu m per hour 40...60;
Automatic operation mode;
Twin-shaft concrete mixer BP-2G-1500s;
Hoppers (number of x capacity, cu m) 3 x 12 = 36;
Silo capacity (optional), tons from 22;
CAMOZZI Pneumatic equipment (Italy) CAMOZZI;
ABAC Pole Position L20P Compressor (Italy) ABAC;
Design summer;
Load of inert materials into the concrete mixer skip;
Total power, kW 85;
Sector gate, pneumatic control;
Weight, kg 22,000;
Height, mm 8,650;
Width, mm 3,550;
Length, mm 17,550;
COMPACT 60 concrete plant operates in automatic mode in accordance with the single button principle. The operator needs to choose grade of concrete (M50 ... M500) and its amount for loading, and to press the button to start the cycle. PA 2.0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows which can be in-frame or stand near the plant. All equipment is installed on a reinforced mounting frame which is placed on a level ground. No foundation or skip pit needed. BP-2G-1500s Twin-shaft concrete mixer is mounted on an elevated structure. Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.
For storage and dispensing inert materials: DKM-36 batching complex. There are three hoppers of 12 cu m each. Total capacity is 36 cu m. A dispensing conveyor belt where component batching is performed is installed under the hoppers. Components are fed from the hoppers by opening of Camozzi pneumatically operated gates (Italy). Upon achievement of the required batch of inert materials, the conveyor is turned on, and inert materials are fed into the skip that hoists the components to the concrete mixer.
Cement is stored in a silo (option). The cement silo needs to be manufactured at the site, or another option shall be chosen. To feed cement from the silo into the cement dispenser, a screw conveyor shall be purchased. Cement, water and chemical additives are batched in BD-60 block if dispensers. Cement is batched in cement dispenser with maximum dosage 600 kg. Water is batched in water dispenser with maximum dosage 300 litres. Chemical additives are batched in 40 litres dispenser.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated. One cycle lasts for 55-60 seconds during which 1 cu m of ready-to-use concrete is produced.
