zzbo lenta-36 Concrete Plant

Special features

Capacity: 36 cu m per hour

Twin-shaft mixer, belt conveyor for inert materials feeding

Automatic control, "single button" principle

Transportation in two 2 euro trucks or 40-foot containers

2 year full warranty

Technical Features

Capacity, cu m per hour 24...36

Automatic operating mode

BP-2G-750 Concrete mixer

Hoppers (number of x capacity, cu m) 2 x 15

Silo capacity (optional), tons from 22

CAMOZZI Pneumatic equipment (Italy)

ABAC Pole Position L20P Compressor (Italy)

Design - summer

Load of inert materials into the concrete mixer - belt conveyor

Total power, kW - 51

Sector gate, pneumatic control

Weight, kg - 10,000

Height, mm - 8,000

Width, mm - 9,343

Length, mm - 22,350

Price EXW, includes VAT 0% and depends on the exchange rates

CBP operation mode - fully automatic, according to "single button" principle . BP-2G-750 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. LENTA-36 concrete mixing plant is equipped with a chevroned belt conveyor for lifting and loading of the aggregates into the mixer.

For storage and precise batching of the inert materials - DK-30 batching complex. A bigger batching complex (up to 45 cu m) can be supplied on your demand. Inert materials are stored in 2 hoppers of 15 cu m each. DK-30 total capacity - 30 cu m. There is a dosing conveyor installed under the hoppers on which the aggregates are being batched. The aggregates are loaded on the conveyor by opening of CAMOZZI pneumatic system operated gates. Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.

Cement is stored in a silo (optional). The silo can be fabricated by yourselves. To feed cement from the silo into the cement dispenser there used a screw conveyor. Cement is fed into BD-30 block of dispensers.BD-30 consists if 300 kg cement dispenser, 150 l water dispenser and 20 l chemical additives dispenser. Each dispenser is mounted on three high-precision CAS strain sensors and a mounted frame which guarantees high accuracy of the batching. Cement dispenser is supplied with OLI vibrator for cement free falling in case it's sticked.

Batched aggregates are fed into the mixer where they are being mixed. Upon achievement of the required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.

One cycle lasts for 50 seconds maximum during which 0.5-0.6 cu m of ready-to-use concrete is produced. LENTA-36 capacity is 25-36 cu m per hour of operation.