Bizator  /  Adverts  /  agriculture  /  agricaltural technics  /  tractors, spare parts

Heater glow plug SK-1800T for MTZ tractors

Offer type: salePublished: 16.12.2016
Price:1 199 UAH
Company:ok_88@ukr.net
Seller:Oksana
Phones:
Show phone
Write a message
Address:Ukraine, Poltavs'ka Oblast', Hlobyne

Pre-heater of the liquid heating system cooling MTZ - a guarantee of stable operation of equipment in winter period!!!

Works from the mains 220V. Connected to the break pipes the cooling system in any convenient place of the car. Inner diameter pipes connect the 27mm for trucks and 16 mm for vans and cars. For tractors there is a place to connect on the block cylinders. Heating temperature of 60-70°C, heating time -20 to 30 minutes.
Preheater for MTZ (SK-1800T)
The Power Of 1800 Watts.
Voltage – 220V/50Hz
The temperature is 60-70° C

Installation order:

1. Drain the liquid from the cooling system of the tractor and remove the plug from the wall of the cylinder block.

2. Remove dirt a stub, on which the threaded connection.

3. Connect, and then attach the heater to the engine block with the enclosed bolts (using spacers) so that one of the mounting bolts to attach cable grounding.

4. Fill the system coolant.

5. After filling cooling check all joints for leaks. Start the engine and leave running. Re-check the tightness of the joints.

6. If everything is in order, connect the device to the mains.