Appliance NG-2 crimped wire
Offer type: salePublished: 04.12.2017
| Price: | negotiated |
| Seller: |  Lantrat Aleksandr |
| Phones: |  +380503522136 Show phone |
| Address: | Ukraine |
Description and use of a device for testing wire NG-2:
Appliance NG-2 crimped wire designed for laboratory testing of wire from ferrous and non-ferrous metals and their alloys at break according to GOST 1579-80, and tapes, sheet and strip rolled on a bend according to GOST 13813-68. Appliance NG-2 is designed to work in areas such as laboratory.
Technical characteristics of the appliance NG-2 testing bending:
- The number of simultaneously tested samples - 1.
- The distance from the upper generatrix of the rollers to the bottom edge of the leash from 5 to 50 mm.
- The bend angle of the sample to the right and to the left from the vertical of 90 +3°.
- The ranges of objectives of the effort pre-tension sample:
- 1 ... 10 N
- 10 ... 60 N.
- The limit value of the error of the task of the efforts of pre-tension sample:
- ± 0.5 N
- ± 5 N.
- The dimensions of the test specimens of the wire:
- diameter from 0,5 to 5 mm
- length from 100 to 150 mm.
- The sizes of test specimens of wire shaped:
- diameter of circumscribed circle of from 0.5 to 5 mm
- length from 100 to 150 mm.
- Tape and sheet bars:
- thickness of more than 0.3 to 3 mm
- width 20 mm -5
- length from 100 to 150 mm.
- Dimensions 335 x 205 x 480 mm.
- Unit weight of 17.5 kg. of Complete. With verification. Guarantee.
