Compressor 2ВМ4-24/9

Compressor 2ВМ4-24/9 compressor unit 2ВМ4-24/9 consists of the following knots: base, cylinders and electric motor. The base is included a crank mechanism (crankshaft, connecting rod, crosshead), frame, the lubrication unit movement mechanism and lubricator (it is designed for lubrication of cylinders and seals). In dry compressors 2ВМ4-24/9S without the cylinder lubrication of lubricator no.

The frame of the compressor 2ВМ4-24/9 2ВМ-4-24/9 cast-iron, box-like shape, with internal ribs gain. For mounting of compressor cylinders 2ВМ4-24/9 to the frame there special tides.

The compressor cooling system 2ВМ4-24/9-water, open-loop, with a control valve.

At the customer's compressor 2ВМ4-24/9 can be manufactured with a closed cooling system.

Compressors 2ВМ4-24/9 crosshead, two-stage, stationary, reciprocating, opposed, water cooled, lubricated cylinders and glands 2ВМ4-24/9 2ВМ-4-24/9 WITH without lubrication of cylinders and seals. Compressor 2ВМ4-24/9 equipped with automatic protection and alarm. The actuator is made from two-speed induction motor А2К85/24-8/16-NF4 built into the frame of the compressor 2ВМ4-24/9


Features:gas Compressed air
The frequency of rotation of the motor shaft, Rev/min 750
Volumetric capacity reduced to suction conditions, CC/m in 24 min.
Pressure ATM. abs.: The start - End atmospheric 9
The shaft power of compressor kW. 128
Cooling water consumption without limit refrigerator (est.) l/min 48
The quantity of oil filled in the frame of the compressor l 100
Weight of compressor, kg 2750
Overall dimensions, l x W x h/mm 2685/1485/2020



Replacement parts:Refrigerator KMP-11-04
Refrigerator KMP-9/8-04
The motor А2К85
Crankshaft e-4M-2.1
Rod. 204М-4-1-0сб.
Liner ВК140-01/02
Sleeve 304M-4.1.2
Connecting rod bolt 4M-4-2
Nut connecting rod 4M-4-3
The crosshead 104М-3.1
Retaining ring B-58
Stock 1 tbsp. 4М42-10-2
Stock 2 tbsp. 4М25-10-2
The casing 1 of article 4М42-3
The sleeve 2 tbsp. 4М25-3
The sleeve of the crosshead 4M-12
The piston f 420сб. 4М42-10-1
The piston ф250 4М25-10сб.
Ring piston У420х9
Ring piston У250х7
Finned tube L=2100
Finned tube L=1500
Oil Seal SB 50-2.
Ring o 50/18
Ring makokis. 50/19
Spring 50/70
Clutch 50/14
Ring throttle 50/13
Ring push 50/11 (50/12)
Gear helical 105P-2-5
Gear helical 5P-5-1-4
Gear leading. 2СГ50-0705
Gear led. 2СГ50-0705
The roller leading 4М5.10.1
Roller follower 5P-5.1.6
Valve oil 306.593.001
Frame 104М-1
Bearing 3528
Liner A23.01.14001
Liner A23.01.14002
The lubrication unit 104М-5.0 SB
Lubricator 31-04-2
Oil pump gear 4M-5.10 SB
Cylinder 1 St. 4М42-1
Cylinder 2nd article 4М25-1
Finger cross 104М-3.1.0].
Locknut 304M-3.8
The crosshead 304M-3-1
Earring 751 745.001.01
Finger cross 204М-3.3
Locknut 404М-3.8