Compressor 2ВМ4-27/9

Compressor 2ВМ4-27/9 compressor unit 2ВМ4-27/9 includes the following main knots: base, cylinders and electric motor.

Base compressor 2ВМ4-27/9 2ВМ-4-27/9 consists of standardized nodes of a crank mechanism (crankshaft, connecting rod, crosshead), frames, lubrication of the movement mechanism and lubricator.

The frame of the compressor 2ВМ4-27/9 cast iron, cast, box shape with internal rib strengthening. In the upper part of the frame is provided with tight fitting lids hatches providing access to the details of the movement mechanism. The lower part of the frame serves as a reservoir for oil.

Compressor 2ВМ4-27/9 has a double action cylinders of different diameters. Suction and discharge valves are fixed in the nests of pressure resistant glass and a push bolts or studs with nuts. Part of the compressor 2ВМ4-27/9 includes: compressor, gas coolers, cooling systems, automatic control and protection.

Compressor 2ВМ4-27/9 compressor unit 2ВМ4-27/9 – stationary, reciprocating, two stage, reciprocating, water cooled, lubricated cylinders and glands. The actuator is made from two-speed induction motor, built into the frame of the compressor 2ВМ4-27/9.

The compressor cooling system 2ВМ4-27/9 – water, is not closed, control valve. Gas coolers compressor 2ВМ4-27/9 – cylindrical shell-and-tube apparatus with a longitudinal fin tubes. On-demand customer compressor unit 2ВМ4-27/9 can be made with a closed cooling system.


Features:

Gas compressed air
The frequency of rotation of the motor shaft, rpm 750-375
Volumetric capacity reduced to suction conditions, cubic meters per minute 27-13,5
Pressure ATM. abs.: The start - End atmospheric 9
The shaft power of compressor kW. 144-72
Cooling water consumption without limit refrigerator (est.) l/min 130-70
The quantity of oil filled in the frame of the compressor l 100
Weight of compressor, kg 3920
Overall dimensions, l x W x h/mm 3000/1485/2100



Spare parts for compressor 2ВМ4-27/9

Base 304M-0-01сб
The motor А2К85/24УХЛ4
The cooling unit 067344.001
Valve predohranyaya 2st. КП20.00.00.000
Valve predohranyaya 1st. КП40.00.00.000 SB
Frame 104М-1-07
Bearing 3528 GOST 5721-75
The lubrication unit. 104М-5. 0сб
Stantsiia (lubricator) 31-04-2 NF4
Cylinder 1st. in proc. 304 141. 007сб
Cylinder 1st. 731 228 003
Cylinder cover 1st. 712 322.001
Cylinder 2st. in SB 304 141. 008сб
Cylinder 2st. 731 228. 002
Cover cylinder 2st. 712 322.002
Crankshaft e-4M-2.1
Rod 204М-4.1.0 SB
Liner ВК140-01/02
Sleeve 304M-4.1.2
Connecting rod bolt 4M-4.2
Nut connecting rod 4M-4.3
Stock 1st. 104М45.01.00.002.
2st stock. 104М45.01.00.002.-01.
The sleeve 1st. 713642.001.
The sleeve 2st. 713642.002.
Piston 1st. 72.3595.011.
The piston 2 tbsp. 723595.012
Nut stock 758 411.001
, Located near the piston У450х9
Ring piston У250х7
The crosshead 104М-3.1
The crosshead 304M-3.1
Finger cross 104М-3.1.0].
Finger cross 204М-3.3
Earring 751745.001 (01)
Seal 305321.007 sat.
Case 713352.001.
Case 42-12 301111.002 sat.
Flange 42-12 711144.001.
Reducers 711642.003.
Reducers 71.3151.001.
Tip 71.1341.004.
Ring 71.1143.003.
Plate 71.1341.003
Ring 71.1641.002.
Ring oil scraper 75.3616.002.
Cuff 754171.003
Fitting 715553.002
Spring 75.3513.001