Compressor 2ГМ4-24/9
Offer type: salePublished: 09.12.2017
| Price: | negotiated |
| Company: | Torgovyij Dom 'KMZ' |
| Seller: |  Torgovyij Dom 'KMZ' Kristina Aleksandrovna |
| Phones: |  +380664462756 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Kryvyi Rih |
Compressor 2ГМ4-24/9
the compressor unit 2ГМ4-24/9 stationary piston,
two-stage, reciprocating, water cooled, lubricated 2ГМ4-24/9
and without lubrication 2ГМ4-24/9 WITH cylinders and seals. Part of the compressor
2ГМ4-24/9 included: compressor, condenser, cooling system,
automatic control and protection. Compressor 2ГМ4-24/9 includes
the following main knots: base, cylinders and electric motor. Base
compressor 2ГМ4-24/9 consists of standardized nodes
crank mechanism (crankshaft, connecting rod, crosshead),
frame lubrication mechanisms of motion and lubricator (2ГМ4-24/9). Frame
cast-iron, box-like shape, with internal ribs enhance. In
the upper part of the frame is provided with tight fitting lids, hatches,
providing access to details of the movement mechanism. The lower part of the frame
serves as a reservoir for oil. For mounting of compressor cylinders
2ГМ4-24/9 to the frame there are special bosses. The holes cross
edges of the frame a crosshead cast iron casings, employees
guides for crossheads. Compressor 2ГМ4-24/9 has cylinders
double action of different diameter. Suction and discharge valves
fixed in the nests of glass and pressure resistant bolts or
push pins with nuts. All the seal is achieved using
paronite gaskets. Disc pistons, double-acting cast iron
aluminum or steel. Piston rings are cast iron. In compressors 2ГМ4-24/9
without lubrication of the cylinders are rings of self-lubricating
composite materials. The drive of the compressor 2ГМ4-24/9 is
from the two-speed induction motor, built into the frame
compressor 2ГМ4-24/9
