Gefest - modern industrial kiln systems for drying wood of high quality.

Design and manufacture of modern industrial kilns high energy efficiency class (stationary and mobile) for high-quality and high-efficiency drying of wood in a "soft mode".

GEFEST DKA+ — series industrial drying chambers with extremely low energy consumption in the drying process of wood. In the configuration of the DKA series+ pre-installed recovery system thermal energy GEFEST RHE. Camera series DKA assigned to energy efficiency class "A+" and have a short payback period (PP) and a high percentage of return on investment (ROI) by minimizing the cost of expensive energy and high quality drying of wood.

GEFEST DKA — series high-efficiency industrial drying chambers, which in terms of energy consumption belong to the class "A". Have a short payback period (PP) and high percentage of return on investment (ROI) due to the low costs of expensive energy and high quality drying of wood. For the series cameras DKA possible optional installation of the recovery systems GEFEST RHE immediately upon manufacture or later during operation.

GEFEST DKB — budget series economical industrial drying chambers for high-quality drying of wood. Camera series DKB belong to energy efficiency class "B". In the design and manufacture take into account the possibility of further modernization to further reduce energy consumption.

GEFEST DKT — series industrial drying chambers, which is designed specifically for fast and high-quality, but economical drying of wood. A convenient camera for the economical and efficient operation for export, or with stream-the preparation of timber for further sale. Camera GEFEST DKT have a low cost. The possibility of upgrading in the future to further reduce energy consumption.

GEFEST RHE system of recovering thermal energy developed by the engineering center of the company GEFEST specifically to work with a member of the kilns. The system gives reduced energy consumption in 2 times. Installed in the base series cameras DKA+. Available to install the optional system, on other series. The system can be adapted to work with other cameras and systems.

The drying chamber GEFEST provide:
+ defect-free drying of the lumber while preserving the natural physico-mechanical properties of wood including strength and color;
+ consumption of thermal and electric energy is 3 times less energy consumption of similar industrial cameras European manufacturers;
+ the"soft" mode of drying, eliminating the use of vegetablebased (wetting/steaming);
+ high-quality drying of sawn wood of special purpose:
-- solid rock lamella thickness of 4÷12mm;
-oak timber 250х250мм;
-- round log.
-- firewood and more.

Complete industrial drying equipment to existing facilities.
System of recuperation of thermal energy NORMAL RHE for the kilns (reduce the energy consumption of kilns is more than 2 times).
Special energy saving design of buildings industrial drying chambers with full thermal isolation without cold bridges.
Perfectly balanced thermal system for drying chambers.
Superior software and hardware of the conditioning regimens.
Control system of drying process for untrained staff.

Also manufacture industrial:
+ drying chamber for thermal modification of wood;
+ painting and drying and painting chamber;
+ climatic chamber;
+ curing chamber;
+ Autonomous system of power supply;
+ facade system with active thermal insulation ECOCOLT®;
+ another non-standard technological equipment.

GEFEST LLC — Individual project and best technical solutions for any need!

Pre-order details are discussed by phone (+38097) 069-70-70.

E-mail: gefest@sushilka.kiev.ua
http://www.sushilka.kiev.ua