КД2122 (КД2322) single-crank Press outdoor the us.16t

Press the tilt rotor crank КД2322 equipped with automatic feed, can be used in automatic and production lines. Removing products from the stamp is to fail in the clearance between the rack presses. The drive of the slide motor through V-belt transmission, the flywheel mounted in a clutch-brake, and the eccentric shaft. Clutch-brake — getcollationkey, multi-disc, friction, pneumatically power on; built into the flywheel. Nominal effort of press, t: 16. The greatest stroke of the RAM (rod), mm: 5..55. The angle of inclination of the frame, deg: 30. Table dimensions, mm: 280 x 420. The size of the holes in the table, mm: 140 x 210. The diameter of the hole in the table, mm: 180. Maximum distance between table and slider in its lower position, the closed height of press, mm: 220. The distance from the axis of the rod to the base (departure), mm: 160. The frequency of the continuous strokes of the RAM, 1/min: 120. The frequency of the single strokes of the slide button, 1/min: 50..55. The value of the distance adjustment between table and slider, mm: 45. Distance between the uprights of the frame in light, mm: 200. The thickness of the bolster plates, mm: 40. The dimensions of the lower surface of the slide, mm: 190 x 220 x 220190. The maximum stroke of the ejector in the slide, mm: 40. Table height above floor level, mm: 760. Type clutch brake: УА3135. Number of motors: 11. The motor of main drive, kW: 2,0. The press dimensions (length width height), mm: 990 x 1130 x 1875. Press weight, kg: 1400. Good condition. Complete. Connected. You can check the work. Little used Location: Kiev region. More information at: http://marketstan.com http://marketstan.all.biz http://marketstan.com.ua