Network twisted pair cable in Ukraine
| Company: | Kompaniya "DEPS" |
| Seller: |  menedzher |
| Phones: |  +380 44 323 88 88 Show phone |
| Address: | Ukraine, Kyiv |
Twisted pair is a kind of cable which consists of several conductors. Examining the product more details, you may notice that the conductors are twisted with each other. The manufacturer reports that this is necessary to minimize electromagnetic effects. Choose the appropriate cable after clicking on this link: https://deps.ua/katalog/ethernet-kabel.html.
What are the characteristics of the cable?
This view is primarily used to supply signal in the local networks. Outdoor cable can be used for laying in telephone sanitation. For installation of overhead lines will require a type in which is provided a steel wire.
Mainly in the design of the cable can be 4 or 8 conductors. However, we should not forget that in some cases their number can reach up to 1000. Isolation is good, as it is made from PVC. The insulation coating is done in different colors. Due to their separation.
Cable marking
When selecting special attention should be paid to the marking. Every element of it will continue to be responsible for certain design features. In the marking process manufacturers may use different designations, which include:
- U - this element indicates that the design is not a protective screen.
- TP is twisted pair-type of twisted.
- F - this letter says that for the protective screen was used foil.
- S - in view screen is used as a wire braid.
According to the existing standards for the marking can be applied in various combinations. However, if the experience is not enough, in practice problems may occur with confusion. This problem primarily stems from the fact that a cable is most often marked with three letters. To quickly deal with this sort of marking is necessary to know all the features.
When you select a cable, first and foremost, you need to decide the scope. Then based on requirements you need to choose the right marking.
