medical equipment » Advertisements

Advertisements (32)

Products (12)

Companies (4)

Briefcase

Category >

medicine > medical equipment

Filter:

All

buy

sale

rent

exchange

other

services

2008-11-14

Australia, Azerbaijan, Armenia, Belarus, Holland, Georgia, Denmark, Other, Europe, Kazakhstan, Kyrgyzstan, Latvia, Lithuania, Moldova, Russia, SNG, Tadjikistan, Turkmenistan, Turkey, Uzbekistan, Ukraine, Estonia, Japan

SlimLine - Low Cost SW1D4080N361 Microstepping Full Digital Software Controlled Driver 2008-05-29

SNG, Europe

Technical characteristics • Power supply : 48 ÷ 140 Vdc; • Phase current : 1,0 ÷ 8,0 Arms (1,40 ÷ 11,28 Apeak); • Driver type : bipolar chopper; • Chopper frequency : 40 kHz; • Step angle : full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/...

SlimLine - Low Cost LW1D3050N081 Hardware Controlled Full Digital Microstep Driver of 2/4 phases step motors 2008-05-29

SNG, Europe

Technical Characteristics • Power supply : 24 ÷ 80 Vdc; • Phase current : 1.0 ÷ 5.5 Arms (1,4 ÷ 7,8 Apeak); • Driver type : bipolar chopper; • Chopper frequency : 40 kHz; • Step angle : full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, ...

2008-05-28

Europe, Russia, SNG, Ukraine, Estonia, Japan

High torque 4.2” (110 mm) flange step motors MT42FN 2008-05-19

SNG, Europe

- NEMA motor flange: 4,2” (110 mm); - 11,5-30,0 Nm (Bipolar holding torque); - 9,9 А, 10,6 А, 14,1 А, 15,5 А parallel connection; - 4,9 А, 5,2 А, 6,0 А, 7,7 А serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 5500 - 16200 gm*cm2; - ...

High torque 3.4” (86 mm) flange step motors MT34FN62 2008-05-19

SNG, Europe

- NEMA motor flange: 3,4” (86 mm); - 12,5 Nm (Bipolar holding torque); - 5,0 A or 8,4 parallel connection; - 2,5 A or 4,2 serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 4000 gm*cm2; - Presetting of the encoder assembly; - 8 lead ...

High torque 3.4” (86 mm) flange step motors MT34FN47 2008-05-19

SNG, Europe

- NEMA motor flange: 3,4” (86 mm); - 8,5 Nm (Bipolar holding torque); - 5,0 A or 8,4 A parallel connection; - 2,5 A or 4,2 A serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 2700 gm*cm2; - Presetting of the encoder assembly; - 8 ...

High torque 3.4” (86 mm) flange step motors MT34FN31 2008-05-19

SNG, Europe

- NEMA motor flange: 3,4” (86 mm); - 4,5 Nm (Bipolar holding torque); - 6,0 A or 8,4 A parallel connection; - 3,0 A or 4,2 A serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 1400 gm*cm2; - Presetting of the encoder assembly; - 8 ...

High torque, low noise 2.3’’ (56 mm) flange step motors MT23AK 2008-05-19

SNG, Europe

- NEMA motor flange: 2.3” (56 mm); - 0,4 –:- 4,6 Nm (Bipolar holding torque); - 0,4 А, 1,5 А, 3,3 А, 3,5 А, 4,6 А (Phase current); - Step angle: 1.8° ±5%; - Rotor inertia: 0,150 –:- 0,440 кg*cm2; - Presetting of the encoder assembly; - lead ...

2008-04-22

Russia

Alphanumeric Terminal Keyboard 2008-03-03

SNG, Russia

Technical characteristics • Power supply : 24 Vdc ±10% 3.6 W max; • Keys : # 6 function keys and # 4 command keys; • Display : #2-lines * 20-characters backlight LCD; • Front panel : IP65 front membrane and gasket for panel mounting; • ...

GWC Realtime PLC+ motion controller + Gateway 2008-03-03

SNG, Europe

Description: The GWC unit provides three main functionalities: programmable logic controller (PLC), motion controller and gateway. As PLC and motion controller it permits the user to locally controll a process through fieldbus, serial links and I/...

SDLWx180 - Stepping Motor Full Digital Drive 2008-03-03

SNG, Russia

The SDLWx180 is a step motor “clock and direction” driver implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER. In a wall mounting housing the unit integrates a microstep drive able to move the motor according to CLOCK, ...

SDLWx170 - Stepping Motor Full Digital Drive 2008-03-03

SNG, Europe

The SDLWx170 is a step motor “clock and direction” driver implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER. In a wall mounting housing the unit integrates a microstep drive able to move the motor according to CLOCK, ...

MDx3xxxx_V_ Motor and Programmable Drive Integrated System 2008-03-03

SNG, Europe

The MDx3xxxx_v_ is an integrated system including high torque motor, encoder and a programmable drive implemened through a new generation of Digital Signal Processor Controller. In a compact housing the unit integrates the microstep drive able to ...

SDMWx180 Stepping Motor Full Digital Programmable Drive 2008-03-03

SNG, Europe

The SDMWx180 is a step motor programmable driver implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER. In a wall mounting housing the unit integrates a microstep drive able to move the motor according to motion profiling ...

SDMWx170 Stepping Motor Full Digital Programmable Drive 2008-03-03

SNG, Europe

The SDMWx170 module is a compact step motor drive for wall installations. The controller integrates a microstep drive and a logic able to move to some default positionings following precision trajectories according to position and speed commands ...

Ever Elettronica 2008-03-03

SNG, Europe

Since 1977, Ever Elettronica developes and manufactures devices for motion control through step motors being recognized for its innovations and wide solutions range. Design and test at the operative headquarters in Lodi (Italy) meet the quality ...

To SELL a microscope. 2008-02-14

Ukraine, SNG, Russia, Europe

I want to sell a microscope BioLam D12. Three oculars. USSR 1981 Lomo. Full complete set. Urgently!

100% Natural Salt/Mud/Clay of Siberia (Russia) 2007-06-20

Europe, Russia, SNG

www.rapansalt.ru/en/ 100% natural - no additives. Comes from the ecologically clean environment of Western Siberia. The the therapeutic effects of the Rapan range are up to 20 times stronger than those of the Dead Sea products. Competitive price...

Filter:

All

buy

sale

rent

exchange

other

services