Sort by:
Date
Show: 2040100
1 UAH
sale
Description: DIN 439 Nut with fine thread, hex, low, chamfered with dimensions of from 6.0 to 36.0 mm. Materials: Steel grade of strength 4.0 s coating: zinc plating, chemical oxidation,without coating;Steel grade
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Description fasteners: DIN 961 Bolt high strength hex head screw with metric fine fully threaded with sizes from M 8 to M 64, accuracy class A, b, bolt length from 16 to 500 mm. Bolt DIN 961 with small and
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Description fasteners: DIN 961 Bolt high strength hex head screw with metric fine full thread sizes from M8 to M64, accuracy class A, b, bolt length from 16 to 500 mm. Bolt DIN 961 with small and full thread
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard conforms to ISO DIN 7977 8737. Description: DIN 7977 Pin conical pin with thread of constant length with diameter size from 6.0 to 30.0 mm. Materials:Hardened steel with a covering: galvanic galvanization;Stainless
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN 7979. Description: DIN 7979 Pin is cylindrical with internal thread size diameter of from 5.0 to 30.0 mm. Materials:Hardened steel with a covering: galvanic galvanization;Stainless steel: A2 and A4. The
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN 7978 9464-79 complies with GOST, ISO 8736. Description: DIN 7978 Pin with a conical internal thread with diameter size from 6.0 to 20.0 mm. Materials:Steel hardened DINе 7978Coated steel: oxidationStainless steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN 7346Description: DIN 7346 spring Pin cylindrical tubular split, form A - with two-flats with a size diameter of from 2.0 to 10.0 mm. Materials:Steel with a covering: galvanic galvanization;Stainless steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard meets DIN 7343 ISO 8750.Description: DIN 7343 spiral Pin, cylindrical with two flats, tubular reinforced with diameter size from 1.0 to 8.0 mm. Materials:Steel with a covering: galvanic galvanization;Stainless steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard DIN 6325 3128-70 complies with GOST, ISO 8734.Description DIN 6325 cylindrical Pin hardened, ground, guide with diameter size from 2.0 to 20.0 mm. Materials:Hardened steel with a covering: galvanic galvanization;Hardened
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN 1477 conforms to ISO 8747. Description: Pin DIN 1477 countersunk head grooved throughout its length with the diameter size from 1.4 to 6.0 mm. Materials:Steel with a covering: galvanic galvanization;Stainless steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard complies with EN DIN 1476 ISO 8746. Description: DIN 1476 Pin (rivet) cylindrical with round head and a notch along the entire length on three sides, with diameter size from 1.4 to 5.0 mm. Materials:Steel with
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard complies with EN DIN 1475 ISO 8742. Description: DIN 1475 Pin is cylindrical with a Central notch one-third the length of the three sides with a thickness to diameter size from 2.0 to 8.0 mm. Materials:Steel
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN standard complies with EN 1474 ISO 8741. Description: DIN 1474 Pin driven cylindrical with a notch at half the length of the three sides with a thickness to diameter size of from 2.0 to 10.0 mm. Materials:Steel with
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Description: DIN 1 tapered Pin unhardened, shape, sharp, taper 1:50 with diameter sizes of from 1.0 to 10.0 mm. Materials:Steel with coating: chemical oxidation;Steel with a covering: galvanic galvanization;Stainless steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Description: DIN 417 Pin (screw) installation with cylindrical end (axle) and a direct slot to the size of the diameter from 2.5 to 20 mm. the End of the set screw has a special shape, which serves for fixing
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Standard DIN ISO 8992 258 corresponds to. Description: DIN 258 with threaded Pin tapered pin, the guide, the tapered portion of constant length, taper 1:50 with diameter size from 5.0 to 16.0 mm. Materials:Steel with
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
Description: DIN 427 lock Screw (threaded pin) with partial thread, flat end and a straight slot with a size diameter of from 3.0 to 10 mm. the End of the set screw has a special shape, which serves for fixing
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN 975 threaded Pin with metric thread throughout its length, and is designed to build mounting structures with metric thread, suspension of air ducts, ventilation systems in the ceiling.Size from m2 to
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
The threaded stud is made from brass and has a complete metric threads (with interference). The tightness is required to ensure immobility of the joints during operation. Size from m3 to M36 with 1000mm long
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
1 UAH
sale
DIN standard 939 complies with GOST 22034, GOST 22035. Description: DIN 940 Stud threaded galvanized, screwed end = 2.5 d, metric thread sizes from 8.0 to 20.0 mm. Materials:Steel 5,6, 5,8, 8,8,10,9,Coated steel:
Ukraine, L'vivs'ka Oblast', Brody
0505530829
Show phone
