Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  mining and quarry equipment
Sort by: 
Show: 2040100
Conveyor belt
6
190 UAH  sale
Conveyor belts are an integral part of the production of any type. Its scope is the movement of cargo on the conveyor. In most cases, any type of machines for production, in his kit already has the element of
Ukraine, Luhans'ka Oblast', Luhansk
Show phone
Conveyor belt used
6
180 UAH  sale
Our company implements modern materials, which include conveyor belt BU. At the present time it became practical to use in the production of so-called non-stick tape, which does not stick. You don't know where
Ukraine, Luhans'ka Oblast', Luhansk
Show phone
Hammer crusher PE-2, PE-4M
3
negotiated  sale
Hummer crusher PE-2, PE-4M is designed for crushing coal middlings size 0...300 mm at a moisture content up to 25%. Spare parts for hammer crusher - hammer, casing Assembly, the casing, lining plate, cover
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Sold - drill-Rig TRD 250 MNA 32 - Best deal!
3
1 690 000 RUR  sale
1. For SALE DRILLING rig rig TRD - 250 MA, 2005 Century ON the MOVE, does NOT REQUIRE INVESTMENT. ALL DOCUMENTATION AVAILABLE. THE COST OF THE MACHINE IS REDUCED TO 5 500 000. 2. URGENT SALE DRILLING rig
Russian Federation, Samarskaya Oblast', Samara
Show phone
Coupling chain, chain coupling
3
negotiated  sale
Produced by coupling, chain coupling chain. Coupling and coupling to the circuit. Material production: steel GOST 1050-88 or steel GL GOST standard 977-88) Tabular dimensions and characteristics of the image
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The high-frequency rumble GWh
4
negotiated  sale
Manufactured mobile high-frequency rumble GWh h. The high-frequency rumble GWh-h.1 is intended for screening bulk materials with bulk density bulk cargo up to 1.6 t/m, desliming operation. Main parameters and
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The sprocket chain, sprocket idler, sprocket drive
4
negotiated  sale
Produced sprocket chain, sprocket, idler, sprocket, drive, coupling. When the deviation of the required size from the table in the application indicate the length of the hub and the bore diameter d. Material: steel
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The elastic coupling stub finger, MUIT
3
negotiated  sale
Coupling MUIT. Produce flexible couplings the stub finger, MUIT on GOST. It is intended for connection coaxial shafts in the transmission of torque and reduce dynamic loads. No. 6 P-A, Torque N. m. (kgf m)
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The feeder swinging CL 10
4
46 950 UAH  sale
The feeder swinging CL-10 (CS-10). Designed for uniform filing a non-abrasive bulk materials with a bulk weight of up to 1 t/m3 from under hoppers, bins and other unloading devices for subsequent equipment chain.
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The feeder swinging 8-1 CL P. 4340.00.000
3
negotiated  sale
The feeder swinging 8-1 CL P. 4340.00.000. Designed for steady supply of non-abrasive bulk materials with a bulk weight of up to 1 t/m3 from under the hoppers, bins and other unloading devices for subsequent equipment
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Feeder scraper-drum cap-350M
2
negotiated  sale
Produced feeder scraper-drum cap-350M. Designed to prevent escape of gases through the bottom window of the nodes unloading and drying dust plants with a moisture content of from 5% to 12% and fractional composition
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Crane cork lock, flanged, cast iron
3
negotiated  sale
Manufactured cranes cork bushing, flanged cast iron for nominal pressure PN 1.0 MPa (10 kgf/cm2) nominal diameter DN 100, DN 150, DN 200 are used as shut-off valves on pipelines in coal preparation plants, transporting
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Hammer crusher PE-2, PE-4M
3
negotiated  sale
Hummer crusher PE-2, PE-4M is designed for crushing coal middlings size 0...300 mm at a moisture content up to 25%.Specifications of hammer crusher PE-2MCapacity, t/h, not more than 60The particle size of
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The vertical Elevator belt
2
negotiated  sale
Produced by the vertical Elevator belt with a centrifugal gravitational unloading. The Elevator is used for vertical lifting of coal concentrate and other similar packaged, powdered materials. Manufacture of
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Elevator bucket
2
negotiated  sale
Produced elevators bucket-type EOS, EOS, EOS, EOS, EOS, AO, AO, AO, AO, AO. Elevator bucket dewatering is designed for inclined transportation at an angle 65º associated with dehydration of various products enrichment.Elevators
Ukraine, Donets'ka Oblast', Donetsk
Show phone
The roar of the cylindrical HCL
2
negotiated  sale
The roar of the cylindrical GCL 1, GCL 2, 3-1 HCL designed for preliminary screening of raw coal to the maximum the permissible size of pieces for GCL, GCL, up to 250mm, GCL-1 to (HH) mm for humidity up
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Hydrocyclone, nozzles for hydrocyclones
6
negotiated  sale
Produced by hydrocyclones and spare parts of the hydrocyclone. Hydrocyclone GCM 240/10Hydrocyclone GCM 350The hydrocyclone of GCMA 350/10Hydrocyclone GCM 500The hydrocyclone of GCMA 500Hydrocyclone HCM 630Hydrocyclone
Ukraine, Donets'ka Oblast', Donetsk
Show phone
Produce pipe fittings
sale
We manufacture and supply a connecting pipeline details on THE 1468-001-89383092-2011: elbows, tees, reducers, flanges, caps. As well as: IFS, bottoms of steel 20A, 20F, 20C, 09GSF, PA, HA, HM, HM, 08/12X18H10T, 10X17H13M2T,
Russian Federation, Nizhegorodskaya Oblast', Nizhny Novgorod
Show phone
Sell cone SAC 1500/180 new with storage of Cement mill 4,h,5 ( TSM 4,0 ×13.5 m) new - 2 pieces
sale
Sell cone SAC 1500/180 new with storage of Cement mill 4,h,5 ( TSM 4,0 ×13.5 m) new - 2 piecesSell cone SAC 1500/180 new with storage of Cement mill 4,h,5 ( TSM 4,0 ×13.5 m) new - 2 pieces   We look forward to
Ukraine
Show phone
The pipe handling 2-265508 or 2-265509 for mill MSR,MSC,MSC.2*4.5 (3200*4500),weight kg
negotiated  sale
  1. The neck of the funnel No.1374.04.103 for mill MSR,MSC,MSC,1*3.0,weight kg. 2. The neck of the funnel No.1374.04.103-1 for mill MSR,MSC,MSC,1*3.0,weight kg. 3. Funnel discharge No.1362.04.216 for mills
Ukraine, Odessa oblast', Odesa
Show phone