Products

Advertisements (481)

Products (3)

Companies (4)

Briefcase

Category > medicine > medical equipment

SlimLine - Low Cost 29.05.2008
SNG, Europe

LW1D3050N081 Hardware Controlled Full Digital Microstep Driver of 2/4 phases step motors

Technical Characteristics • Power supply : 24 ÷ 80 Vdc; • Phase current : 1.0 ÷ 5.5 Arms (1,4 ÷ 7,8 Apeak); • Driver type : bipolar chopper; • Chopper frequency : 40 kHz; • Step angle : full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, ...

SW1D4080N361 Microstepping Full Digital Software Controlled Driver

Technical characteristics • Power supply : 48 ÷ 140 Vdc; • Phase current : 1,0 ÷ 8,0 Arms (1,40 ÷ 11,28 Apeak); • Driver type : bipolar chopper; • Chopper frequency : 40 kHz; • Step angle : full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/...

»view full text

High torque step motors 16.05.2008
SNG, Europe

High torque, low noise 2.3’’ (56 mm) flange step motors MT23AK

- NEMA motor flange: 2.3” (56 mm); - 0,4 –:- 4,6 Nm (Bipolar holding torque); - 0,4 А, 1,5 А, 3,3 А, 3,5 А, 4,6 А (Phase current); - Step angle: 1.8° ±5%; - Rotor inertia: 0,150 –:- 0,440 кg*cm2; - Presetting of the encoder assembly; - lead ...

High torque 3.4” (86 mm) flange step motors MT34FN31

- NEMA motor flange: 3,4” (86 mm); - 4,5 Nm (Bipolar holding torque); - 6,0 A or 8,4 A parallel connection; - 3,0 A or 4,2 A serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 1400 gm*cm2; - Presetting of the encoder assembly; - 8 ...

High torque 3.4” (86 mm) flange step motors MT34FN47

- NEMA motor flange: 3,4” (86 mm); - 8,5 Nm (Bipolar holding torque); - 5,0 A or 8,4 A parallel connection; - 2,5 A or 4,2 A serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 2700 gm*cm2; - Presetting of the encoder assembly; - 8 ...

High torque 3.4” (86 mm) flange step motors MT34FN62

- NEMA motor flange: 3,4” (86 mm); - 12,5 Nm (Bipolar holding torque); - 5,0 A or 8,4 parallel connection; - 2,5 A or 4,2 serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 4000 gm*cm2; - Presetting of the encoder assembly; - 8 lead ...

High torque 4.2” (110 mm) flange step motors MT42FN

- NEMA motor flange: 4,2” (110 mm); - 11,5-30,0 Nm (Bipolar holding torque); - 9,9 А, 10,6 А, 14,1 А, 15,5 А parallel connection; - 4,9 А, 5,2 А, 6,0 А, 7,7 А serial connection; - Step angle: 1.8° ±5%; - Rotor inertia: 5500 - 16200 gm*cm2; - ...

»view full text

Stepping Motors. Full Digital Programmable Drives. Motion controllers. Hardware and Software motion control solutions. 14.05.2008
SNG, Europe

SDMWx170 Stepping Motor Full Digital Programmable Drive

The SDMWx170 module is a compact step motor drive for wall installations. The controller integrates a microstep drive and a logic able to move to some default positionings following precision trajectories according to position and speed commands ...

SDMWx180 Stepping Motor Full Digital Programmable Drive

The SDMWx180 is a step motor programmable drive implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER. In a wall mounting housing the unit integrates a microstep drive able to move the motor according to motion profiling commands...

GWC Realtime PLC+ motion controller + Gateway

The GWC unit provides three main functionalities: programmable logic controller (PLC), motion controller and gateway. As PLC and motion controller it permits the user to locally controll a process through fieldbus, serial links and I/Os and ...

MDx3xxxx_V_ Motor and Programmable Drive Integrated System

The MDx3xxxx_v_ is an integrated system including high torque motor, encoder and a programmable drive implemened through a new generation of Digital Signal Processor Controller. In a compact housing the unit integrates the microstep drive able to ...

SDLWx170 - Stepping Motor Full Digital Drive

The SDLWx170 is a step motor “clock and direction” driver implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER. In a wall mounting housing the unit integrates a microstep drive able to move the motor according to CLOCK, ...

»view full text