Bizator  /  Adverts
business consultancy and services
business consultancy and services
equipment and materials
equipment and materials
Sort by: 
Show: 2040100
Siphon A-40089 1 1/2" for bathroom in-line Waterstal from Odaprom
93 UAH  sale
Siphon A - 40089 1 1/2" for bathroom in-line with overflow and flexible pipe "Waterstal" from the manufacturer Odaprom.Siphons for washbasins, kitchen, baths TM "Waterstal" from the manufacturer.Advantages of
Ukraine, Kyiv
Show phone
Show phone
Show phone
reversible pneumatic grinding sander Wave of the USSR
5
sale
reversible pneumatic sander Wave of the USSR the diameter of a wire brush is 100-110mm power air motor 700ВТ pressure 0.5 MPa the spindle rotation speed at idle-70C-1 speed spindled load -42s-1 air consumption неболее1,5m/min
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
PNEVMATIKA RSM-22-8-160 the USSR
3
250 UAH  sale
It is intended for performance of bolt (screw) fasteners.SpecificationsSpeed, +-10%, 1/min, idling 300when normal power 150The maximum torque on the spindle 15,69Internal hex of the spindle S12The diameter of
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
pneumatic grinding machine шм25-50
5
350 UAH  sale
Pneumatic machine BL-25-50 has the largest diameter of the grinding wheel 50 mmSet of 2 protective cover,ID card+spare bladesthe diameter of the collet-6mmdiameter grinders-49mmthe diameter near the spindle-33mmthe power
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
Corner reversible pneumatic hand impact wrench SP-3207
3
200 UAH  sale
Corner reversible pneumatic hand impact wrench SP-3207 is designed for Assembly and disassembly of threaded connections hard. The diameter of the screwed up thread, 14 mm The tightening torque N*m (kgf*m) 100(10)
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
Pneumodrilt SP-1020
2
700 UAH  sale
Newmodel IP-1020 (the drill 13 mm cone Morse 1), irreversible, direct. THE 22-5420-83. Designed for drilling, countersinking and deployment of holes in steels of high strength, cast iron, non-ferrous metals
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
pneumohangars ип3113 (250Нм )
3
550 UAH  sale
The wrench is for screwing and unscrewing threaded connections of the hard. Type pistol Square spindle, mm 14 Max. tighten the thread diameter, 18 mm Max. torque, Nm 250 Air consumption, l/min 800 Working pressure
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
Pneumatic drilling machine SP-1019
2
600 UAH  sale
Pneumatic drilling machine SP-1019 Drill manual drill straight pistol configuration pneumatic SP 1019, is designed for drilling holes (diameter up to 13mm) when assembling works ( in steels of high strength, cast
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
Hammer chipping SP-4119 pneumatic
2 000 UAH  sale
Hammer chipping SP-4119.The preferred tools used in machine building metallurgy and production of pipe casting and also used for cutting metal products, edging, cleaning and caulking of welds for cutting grooves
Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Show phone
Продам электромагниты: DRUGS-230; DRUG-231; DRUG-213; DRUG-235; DRUG-244
negotiated  sale
Продам электромагниты: DRUGS-230; DRUG-231; DRUG-213; DRUG-235; DRUG-244 Хранения c, новые электромагниты постоянного токарь толкающего типа: DRUG электромагнит-230; электромагнит DRUG-231; электромагнит DRUG-213;
Russian Federation, Moscow
Show phone
Betterbest to press the sawdust, straw (250-300 kg/hour)
8 800 $  sale
For processing waste generated during processing of wood, processing , flax, etc. developed the technology of briquetting of waste.Briquetting is the process of compacting finely ground waste under high pressure
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Shock mechanical press for producing fuel briquettes Naestro (500-700 kg/h)
2
15 000 $  sale
Specifications BT-60(Poland)1 Performance ― sawdust kg/h 500-7002 Performance ― straw kg/h 350-5003 Permissible humidity % 124 compression ratio ― volume to of dry raw material volume of the preform To ----5
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Line drying and crushing of sawdust and wood chips up to 1000 kg/h
5
595 000 UAH  sale
Is intended for drying wet sawdust capacity up to 800 – 1000 kg/h. The line is built on the basis of a drum drying AVM 065 with restored drum. Electrical equipment used new. Technical characteristics of
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Equipment for the production of pellets, pellets, capacity up to 1200kg/h
sale
GM 1.5 is designed to work in difficult conditions. This becomes possible, thanks to a modern the pressure node, new the dispenser, made of stainless steel gears and shafts the use of special zinc-containing paints.
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Granulator OGM 1, 5, 0 BT, for 8 proizvodstvenny and granules
250 000 UAH  sale
Pellet mill is the main part of the equipment, which is designed to produce biomass pellets by forcing her pressing rollers through the radial holes of the annular matrix. Since the granulator is designed to
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Line for production of fuel pellets, the pellets 800-1000kg/h, BT-1, 5
3
720 000 UAH  sale
GK Bioeconomy offers a line granulation based on its own produced granulator OGM 1.5. Granulator OGM 1.5 production of GC "Biotechprom" is designed to work in difficult conditions. This is possible thanks to
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Feeding table for bales of straw, hay, stationary electric
4
sale
Automatic feeding table for bales of straw. The feed table can increase the efficiency of chopper, providing a continuous feed of bales to the hopper choppers. On the table you can put up to 3 bales of straw,
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Chaff-cutter-chopper-straw rolls (1500-1800 kg/h).
2
200 000 UAH  sale
The company produces Bioeconomy universal cutters of different types. The BEP straw-cutting machine 1500 ― crusher-straw (straw) ― straw chopper, hay, alfalfa, canola, dry corn cobs, stalks of reeds and other
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Mobile chaff-cutter. The shredder rolls, bales (500-800 kg/HR.)
3
225 000 UAH  sale
Shredder mobile. Designed for grinding different breeds of phytomass (straw, hay, etc) Total power 40 kW The performance depends on the fraction of the output from 500kg / h to 800 kg / hour. There many more
Ukraine, Poltavs'ka Oblast', Poltava
Show phone
Chaff-cutter Tomahawk 505 B/(Chopper straw bales)
3
9 000 EUR  sale
Chaff-cutter Tomahawk 505 (shredder) is suitable for grinding the straw production capacity of about 1000-2000 kg / h. Characterized by robust design and ease of use. Source raw material in bales with a
Ukraine, Poltavs'ka Oblast', Poltava
Show phone