Sort by:
Date
Show: 2040100
sale
The device is designed to determine the adhesion and resistance to damage by scratching ASTM D 2197 "Method of determining the adhesion of organic coatings using scratching". The device meets the requirements of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: A device for determining the strength of the film at impact. Available in two versions (cargo weight 1 or 2 kg). The design of the instrument Kick U1 made in accordance with modern requirements of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Description: The device is a cylindrical brass vessel with a handle and three holes, two of which are located along the generatrix of the cylinder (the passport - side holes), and the third in the centre of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
The instrument measures the elasticity, strength of coatings under bending around a set of cylindrical rods with diameters of cores from 1 mm to 20 mm The device complies with GOST R 52740-2007, GOST 6806-73
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Purpose: The depth gauge is designed (depending on configuration): operational control of the focal depth of corrosion; depth control narrow holes and grooves Specifications: 1) measuring range, mm 0,05 -
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Viscometer VZ-246 is designed for rapid determination of viscosity (timeout) paint materials or related products - Newtonian or approaching liquids in accordance with standard GOST 9070-75. The viscometer is
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Purpose: The applicator is used for applying layers of paint and other materials required thickness on the plate when conducting complex tests. Version: AU-150 - the width of the groove 150 mm AU-200 -
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Is used to control the adhesion of paint and other coatings. Adhesion devices UCB AC-1 corresponds to the standard ISO 4624. Adhesion devices mechanical peel-off type designed to control the adhesion (adhesion
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed for rapid non-destructive testing of hardness: •metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); •metals with different properties from steel
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Stationary hardness Rockwell TC-R is designed for measuring hardness of metals and alloys in laboratory conditions. Stationary hardness tester is used for manufacturing workers measures the hardness of portable
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Stationary digital Durometer for Micro Vickers UCB TC-MAC is designed to measure the micro hardness Vickers. The hardness tester is equipped with a large contrast display, easy and simple in setup and operation.
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed to measure the hardness of products from alloys, hardened steels and metals under laboratory conditions. The Brinell Hardness Tester. The main advantages compared with previous models: •Higher accuracy
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Designed to detect defects such as the violation of the continuity and homogeneity of the materials semi-finished products, finished products and welded joints, to measure the depth and coordinates of their
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Universal hardness tester Brinell, Rockwell, Vickers hardness is suitable for measuring the hardness of ferrous and non-ferrous metals and hard alloys Brinell, Rockwell and Vickers. Hardness of the CU-BRW can
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Standard samples are intended to ensure the reliability and consistency when ultrasonic inspection of the company as at serial production and testing technologies for production. All standard samples of
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
We manufacture transformers for General and special purpose, standard and under the order: straight, slanted, dual, ground and other All transducers can be used with ultrasonic flaw detectors of domestic and
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
sale
Durometer shore is suitable for measuring the hardness of rubber on the surface of products in accordance with GOST 263-75. The hardness tester conforms to standards: ISO 7619 and ISO 868, DIN53505, ASTM D2240
Ukraine, Dnipropetrovska Oblast', Novomoskovsk
(056) 767-05-09
Show phone
